Installation v Making Connections, 2-13

Page 30

2. Installation

v Making Connections

NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from the RGB output unless the notebook PC is turned on after connecting with the projector.

*If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software.

*If you accidentally hit the POWER button on the remote control, wait 90 seconds (2 minutes in the optional extended life lamp GT60LPS) and then press the POWER button again to resume.

When Viewing a DVI Digital Signal:

To project a DVI digital signal, be sure to connect the PC and the projector using a DVI-D signal cable (not supplied) before turning on your PC or projector. Turn on the projector first and select DVI (DIGITAL) from the source menu before turning on your PC.

Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this happen, restart your PC. Do not disconnect the DVI-D signal cable while the projector is running. If the signal cable has been disconnected and then re-connected, an image may not be correctly displayed. Should this happen, restart your PC.

NOTE:

•Use a DVI-D cable compliant with DDWG (Digital Display Working Group) DVI (Digital Visual Interface) revision 1.0 standard. The DVI-D cable should be within 5 m (196") long.

•The DVI (DIGITAL) connector accepts VGA (640x480), SVGA (800x600), 1152x864, XGA (1024x768) and SXGA (1280x1024 @ up to 60Hz).

Connecting Your PC or Macintosh Computer

DVI

AUDIO OUT

RGB 1

SLOT 1

SLOT 2

RGB 2

RGB 1

RGB 2

RGB

VIDEO S-VIDEO

			2
USB A	USB B	PC CARD	1
	PC CONTROL		LAN
	IN
			REMOTE 1
	OUT
	SC TRIGGER		REMOTE 2
		IN	OUT
			AC IN

Audio cable (not supplied)

RGB signal cable (not supplied)

To mini D-Sub 15-pin connec- tor on the projector.

PHONE

IBM VGA or Compatibles (Notebook type) or Macintosh (Notebook type)

BNC×5 cable (not supplied)

Audio cable (not supplied)

IBM PC or Compatibles (Desktop type) or Macintosh (Desktop type)

PHONE

DVI-D cable with ferrite core (not supplied)

Audio cable (not supplied)

NOTE: For older Macintosh, use a com- mercially available pin adapter (not supplied) to connect to your Mac's video port.

Connecting your PC or Macintosh computer to your projector will en- able you to project your computer's screen image for an impressive pre- sentation.

To connect to a PC or Macintosh, simply:

Connecting to RGB 1 IN connectors (BNC)

Use a BNC×5 cable (not supplied) to connect your PC and the RGB 1 IN connectors on your projector.

1.Turn off the power to your projector and computer.

2.Use a commercially available signal cable to connect your PC or Macintosh to the projector.

3.Turn on the projector and the computer.

4.If the projector goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you've connected to the projector.

Connecting to RGB2 IN connector (D-Sub 15 Pin)

Use an RGB signal cable (not supplied) to connect your PC and the RGB2 IN connector on your projector.

Connecting Your PC with a DVI Connector

Use a DVI-D signal cable (not supplied) to connect a DVI connector of your PC to the projector.

NOTE: The GT6000/GT5000 is not compatible with video decoded outputs of either the NEC ISS-6020 and ISS-6010 switchers.

2-13

Contents GT6000/GT5000 LCD Projector User’s ManualPrecautions Important InformationImportant Safeguards InstallationLamp Replacement Power SupplyCleaning Fire and Shock PrecautionsTable of Contents z Whats in the Box? Introductionv Remote Control Features x Introduction to the ProjectorInformationImportant 1. Introduction z Whats in the Box?Projector 1. Introduction x Introduction to the Projector1. Introduction c Getting to Know Your Projector Attaching and Removing the Terminal Covers1. Introduction Depression for foot 4 locations1. Introduction Carrying the ProjectorTop Features Terminal Panel Features 1. Introduction1011 1. Introduction6.SC. TRIGGER Mini Jack v Remote Control Features 1. Introduction1-11 27 281. Introduction 10. UNDOOperating Range for Wireless Remote Control Remote Control PrecautionsRemote Control Battery Installation 1. Introduction1-13 Using the Remote Control in Wired Operation1. Introduction AUDIO OUTx Lens Shift Adjustable Range Installationz Setting Up Your Projector c Optional Lens InstallationScreen Size and Projection Distance 2. Installationz Setting Up Your Projector Height2. Installation Throw distanceGT06RLB Desktop/Front 2. Installation x Lens Shift Adjustable RangeMaximum Possible Range for GT12ZLB/GT20ZL/GT48ZLB VerticalDesktop/Front0.32V Vertical 2. InstallationLens Shift Adjustable Range continued Ceiling/Front2. Installation c Optional Lens Installation Before installation2. Installation e Secure the 4 screws using the hexagonal driver2. Installation For installing the GT12ZLB2. Installation SLOT12-10 2. InstallationFor installing the GT06RLB PC CeSecure the 2 screws using the hexagonal driver 2. Installatione Secure the 4 screws using the hexagonal driver 2-112. Installation To adjust2-12 Connecting Your PC or Macintosh Computer 2. Installation v Making ConnectionsWhen Viewing a DVI Digital Signal Connecting to RGB 1 IN connectors BNC2-14 2. InstallationConnecting an External Monitor To connect SCART output RGB2-15 2. InstallationConnecting Your DVD Player DVD player2-16 2. InstallationConnecting Your VCR or Laser Disc Player VIDEO2-17 2. InstallationConnecting to a Network Example of LAN connection2. Installation Connecting the Supplied Power Cable2-18 Projecting an Image Basic OperationStandby or Idle 3. Projecting an Imagez Turning on the Projector Flashing for3. Projecting an Image c Adjusting the Picture Size and PositionUsing the menu x Selecting a Sourcev Correcting the Horizontal and Vertical Tips on Adjusting Focus3. Projecting an Image Keystone Distortion 3D ReformWhen using the remote control or cabinet buttons 3. Projecting an Imagen Turning Up or Down Volume 3. Projecting an Imageb Optimizing RGB Picture Automatically 3. Projecting an Image m Turning off the ProjectorTo turn off the projector Convenient Features x Enlarging and Moving a Picture 4. Convenient Featuresz Turning Off the Image and Sound c Getting the On-lineHelp and Informationb Using the USB HUB Function 4. Convenient Featuresv Using the USB Mouse Operate the PC mouse using the USB mousem Making Freehand Drawings on a Projected 4. Convenient Featuresn Changing Background Logo Image ChalkBoard4. Convenient Features Lens Memory Reference memoryCustom memory Using the Viewer z Making the Most out of the Viewer Functionplayback z Making the Most out of the Viewer Function 5. Using the ViewerFeatures Easy to useFolder 5. Using the ViewerWhen the tool bar is not displayed x Operating the Viewer Function from theViewing Digital Images 5. Using the ViewerAuto Play Mode Preparations5. Using the Viewer Using the PC Card Files Fucntion PC Card FilesDeleting Captured Images Using the Projector in a Network z END USER LICENSE AGREEMENT 6. Using the Projector in a Network6.Limitations of Warranty 1.TermProjector Easy Connection Settings 6. Using the Projector in a NetworkContents of the Supplied CD-ROM xIntroductionResolution 6. Using the Projector in a Networkwhen used c Supported ProjectorsWhen Using a Network Environment 6. Using the Projector in a Networkv Equipment Connections and Settings Settings at the Projector SideInstallation 6. Using the Projector in a Networkb Software Installation UninstallingDynamic Image Utility 6. Using the Projector in a Networkn Starting/Exiting the Software Start the SoftwareCheck Points 6. Using the Projector in a NetworkmTroubleshooting CountermeasuresCountermeasures 6. Using the Projector in a NetworkCheck Points Check PointsCheck Points 6. Using the Projector in a Network6-10 CountermeasuresCheck Points 6. Using the Projector in a Network6-11 CountermeasuresSetting Up for Double Stacking in Link Mode 7. Setting Up for Double Stacking in Link Mode z Stacking and Connecting the Projectorsz-1.Assigning Projector IDs Recommended Throw Distances for Double Stack 7. Setting Up for Double Stacking in Link ModeThrow Distances for Optional Lenses z-2.Stacking the Projectors7. Setting Up for Double Stacking in Link Mode z-3.Hookupv Link Mode Setting 7. Setting Up for Double Stacking in Link Modex Adjusting and Registering Signals to Be Projected7. Setting Up for Double Stacking in Link Mode b List of Menu Items Available in Link ModeUsing On-ScreenMenu z Basic Menu Operation 8. Using On-ScreenMenuUsing the Menus Customizing the Menu8. Using On-ScreenMenu x List of Direct Button Combinations8. Using On-ScreenMenu c Menu tree 8. Using On-ScreenMenu Advanced Menu Source Select Adjust Source Sound8. Using On-ScreenMenu Advanced Menu Source Select Adjust Source SoundEntry Edit Command 8. Using On-ScreenMenuUsing the Entry List v Menu Descriptions & FunctionsVideo Adjust not available for RGB 8. Using On-ScreenMenuAdjust Source YTR AdjustmentSplit Mode 8. Using On-ScreenMenuSweetVision DeinterlaceAdjusting White Balance 8. Using On-ScreenMenuAdjusting Color Temperature Selecting Base SettingSignal Type 8. Using On-ScreenMenuSignal Level Volume/Bass/TrebleUsing 3D Reform 8. Using On-ScreenMenuRef. Adjust 8-12All Data /Current Signal 8. Using On-ScreenMenuFactory Default Projector OptionsSelecting Menu Display Time 8. Using On-ScreenMenu8-14 PagePage Setting Viewer Options Viewer Options 8. Using On-ScreenMenuSetup Setting Mouse Button and Sensitivity Mouse8-16 8. Using On-ScreenMenuPage Selecting Signal Format Signal Select Selecting Operation Mode Operation Mode SelectEnabling Last Memory Last Memory 8. Using On-ScreenMenu8-17 Page8-18 8. Using On-ScreenMenuLamp Settings Link Mode8. Using On-ScreenMenu 8-19LAN Mode 8. Using On-ScreenMenu 8-20Advanced 8. Using On-ScreenMenu WEP for Wireless only8-21 8. Using On-ScreenMenu 8-22Mail 2. Setting the Seamless Switch function 8. Using On-ScreenMenuSeamless Switch GT6000 only 8-238-24 8. Using On-ScreenMenuSetting a Password DeleteSecurity 8. Using On-ScreenMenu8-25 To register a PC card as a protect keyOn/Off Timer 8. Using On-ScreenMenuTimer ToolsDisabling the On or Off Timer 8. Using On-ScreenMenuEnabling the On or Off Timer Deleting the On or Off Timer settingsUsing PC Card Files 8. Using On-ScreenMenuUsing Capture GT5000 only Using ChalkBoardProjector Information 8. Using On-ScreenMenu8-29 Test Patternc Cleaning the Cabinet and the Lens Maintenancex Replacing or Cleaning the Filter z Replacing the LampTo replace the lamp 9. Maintenancez Replacing the Lamp InterlockTo clean the filter 9. Maintenancex Replacing or Cleaning the Filter To replace the filter9. Maintenance c Cleaning the Cabinet and the LensAppendix Reader Support 10. Appendixz USB Memory Device or USB Memory Card 10-2Status Indicator 10. Appendix xTroubleshootingPower Indicator Lamp 1/2 Indicator10. Appendix Common Problems & SolutionsProblem 10-4•Power on process for the projector and the PC 10. Appendix10-5 Model Number 10. Appendix cSpecifications10-6 GT6000/GT500010. Appendix 10-7Mechanical Mini D-Sub15 Pin Connector 10. Appendix v Cabinet Dimensionsb Pin Assignments of D-SubRGB Input Connector 10-810. Appendix n Compatible Input Signal List 10-9Pin No 10. Appendix m REMOTE 1 Connector10-10 SHORT/OPEN10. Appendix Using Software KeyboardPC Control Connector D-SUB9P PC Control Codes and Cable Connection10-12 ⁄0Operation Using an HTTP Browser10. Appendix Overview10. Appendix 10-13RGB1 HOW LONG IS THE WARRANTY LIMITED WARRANTY USA and Canada onlyNEC SOLUTIONS’ PROJECTOR PRODUCTS WHAT IS COVERED AND WHAT IS NOT COVEREDDECLARATION OF CONFORMITY