NEC 320Fc manual Installing Java Runtime Environment, Changing VTM IP address

Pre-Upgrade Tasks

Installing Java Runtime Environment

Java Runtime Environment is necessary for running Active Upgrade.

Install the following Java Runtime Environment:

Sun Microsystems Java™ Runtime Environment Version 5.0

Update 8 (1.5.0_08) or later

Configuring IP address in Virtual Technician Module (VTM)

IP addresses must be configuredin VTM to run Active Upgrade.

Configure IP addresses in VTM as described in this section.

IMPORTANT

The following IP addresses must be configured in VTM.

192.168.1.1

192.168.1.2

192.168.1.3

192.168.1.4

192.168.1.5

If the address specified in the network adapter and VTM is the same, the active Upgrade process does not run properly. If the IP addresses above are the same as the ones in the network adapter, be sure to change the IP addresses specified in VTM by performint the following “Changing VTM IP Address Information” before performing the procedure described in “Configuring IP Address in VTM.”

Changing VTM IP address

Log on as an administrator or member of Administrators group, and change the IP addresses specified in VTM using the following procedures.

1.Open C:\Program FilesftsysVTM in Windows Explorer, and open the VTMNETConfig.vbs file by clicking Edit after right-clicking the VTMNetConfig.vbs file.

Preparing for the Active Upgrade Process 2-13