![](/images/new-backgrounds/1103032/10303283x1.webp)
Figure 2-3. Automatic Updates Icon in System Tray
To verify the list of updates
1.Click the Automatic Updates icon to display the Automatic Updates dialog box.
2.Select Custom Install (Advanced) and click Next. The next page displays the list of the updates you downloaded.
3.Check the list of updates against the list of updates that have been evaluated by NEC Corporation of America for compatibility. Make note of the updates you can install during the Active Upgrade process.
4.Click Cancel to exit the Automatic Updates utility. Do not select or install updates at this time.
N O T E
You should plan to install all
QFE patches that fix a particular problem, before obtaining validation from NEC Corporation of America
See “Recommendations” on page
After you have verified and recorded the list of updates you need to install, you are ready to run the Active Upgrade console. To install your updates, click the Automatic Updates icon in the system tray on the Upgrade Side after you have split the system. See “Running Software Installation Programs” on page
Related Topics
•“Copying Software Installation Packages to the System” on page
•
•Configuring the Active Upgrade Process