![](/images/new-backgrounds/1103032/103032179x1.webp)
Finishing the Upgrade
N O T E S
1.Your screen might flicker and you might briefly lose control of your keyboard and mouse as the system recovers its original state.
The abort process should take only a few minutes. When the process completes, the upgrade state is Fault Tolerant Abort Ready. You can click Finish to clean up system resources, as described in “Finishing the Upgrade”.
If the abort process fails the first time, you can click Retry to try again. If the problem persists, see Troubleshooting for information about resolving the problem.
Related Topics
•“Finishing the Upgrade”
•“Viewing Active Upgrade Process Status” on page
•“Verifying If RDR Disks Are Resynchronizing” on page
•Troubleshooting
Finishing the Upgrade
To complete the Active Upgrade process and clean up system resources after committing or aborting an upgrade, click Finish on the Commit Upgrade page or Abort Upgrade page.
The finish process should take only a few minutes. When the process completes, the upgrade state is Fault Tolerant Idle Ready.
If the finish process fails the first time, you can click Retry to try again. If the problem persists, see Troubleshooting for information about resolving the problem.
On the Finish page, upon successful completion of the Active Upgrade process, you can:
•Click Exit to close the Active Upgrade console.
•Click Save Log to save the activity log to a file.