Epson RP-U420 manual Dle Eot, Ascii DLE EOT

						more
C O N F I D E N T I A L					■■ ■■ ■■	more
DLE EOT					EXECUTING COMMAND
[Name]	Real-time status transmission
[Format]	ASCII	DLE	EOT	n
	Hex	10	04	n
	Decimal	16	4	n

[Range]

[Default]

[Description]

1 ≤ n ≤ 4, 6 None

Transmits the selected printer status specified by n in real-time, according to the following parameters: n = 1: Transmit printer status

n = 2: Transmit offline status

n = 3: Transmit error status

n = 4: Transmit paper roll sensor status

n = 6: Transmit validation status

•n = 1: Printer status

Bit	Off/On	Hex	Decimal	Function
0	Off	00	0	Not used. Fixed to Off.
1	On	02	2	Not used. Fixed to On.
2	Off	00	0	Drawer open/close signal is LOW (connector pin 3).
	On	04	4	Drawer open/close signal is HIGH (connector pin 3).
3	Off	00	0	Online.
	On	08	8	Offline.
4	On	10	16	Not used. Fixed to On.
5	Off	00	0	Reserved. Fixed to Off.
6	Off	00	0	No panel switch is pressed.
	On	40	64	One of panel switch is pressed.
7	Off	00	0	Not used. Fixed to Off.
Bit 6:	Even if panel switch is disabled by ESC c 5, bit6 becomes “On” during one of panel switch is pressed.

RP-U420 Status commands DLE EOT Ver. 1.0 p. 69