C O N F I D E N T I A L
■This command should not be used within the data sequence of another command that consists of two or more bytes.
<Example>
If you attempt to transmit ESC ! n to the printer, but DLE DC4 105 interrupts before n is received, the code <10>H for DLE DC4 is processed as the code for ESC ! <10>H.
■This command is enabled even when the printer is not selected by ESC =.
■If the printer receives this command during outputting pulse required by ESC p or DLE DC4 to the same connector pin, this command will be ignored.
■If the printer receives this command during outputting pulse required by ESC p or DLE DC4 to another connector pin, this command will be queued and executed afterward.
Program Example
PRINT #1, CHR$(&H10);CHR$(&H14);CHR$(1)l;CHR$(0);CHR$(5);
Miscellaneous commands DLE DC4 | Ver. 1.0 p. 77 |