Epson E02 manual 4 03-0011 Forced Transmission, 5 03-0012 Reset, Set-up data

UB-E02 Technical Reference Guide

4.7.4 03-0011 Forced Transmission

Transmission is done, regardless of the flow control between the TM printer and the UB-E02.

4.7.4.1 Set-up data

Off-set	Size	Description
14	1	Flow control
		0: With flow control
		1: No flow control (forced transmission)
15	2	Data length (n: maximum: 255)
17	n	Data length (maximum: 255)

4.7.4.2 Reply data

Off-set	Size	Description
14	1	Result
		0: Normal
		Except for 0: Failure
15	2	Data length
17	n	Data string

4.7.5 03-0012 Reset

4.7.5.1 Set-up data

Off-set	Size	Description
14	1	Reserved (undefined)

4.7.5.2 Reply data

Off-set	Size	Description
14	1	Result
		0: Normal
		Except for 0: Failure

❏To reset the printer, the reset function should be enabled by a DIP switch of the printer.

❏The UB-E02 is also reset when the printer is reset.

❏After resetting, wait for approximately 10 seconds before accessing to the UB-E02, which is the same as when turning on the power.

Rev. A 4-9Programming Samples