Epson E02 manual Safety Precautions, Product Servicing, Label

Page 8

Safety Precautions

This section presents important information to ensure safe and effective use of this product. Please read this section carefully and store it in an accessible location.

CAUTION:

❏Be careful to avoid dropping conductive objects such as paper clips on the circuit board, as they could short circuit connections and cause damage from excessive current.

❏This product should only be connected to the devices specified in this guide. Connecting other devices could cause damage, fire or explosion.

❏Never disassemble or modify this product. Tampering with this product may result in injury, fire, or electric shock.

❏Be sure to set the product on a firm, stable, horizontal surface. The product may break or cause injury if it falls.

❏Never connect a public telephone line to the modular connector on this product.

❏Do not use in locations subject to high temperature, humidity or dust levels. Excessive temperature, humidity or dust may cause equipment damage, fire, or shock.

❏Parts on the circuit board may become hot during operation. Therefore, wait approximately 10 minutes after turning the power off before touching them.

❏To prevent the possibility of electrical shock, do not perform installation or connect cables during a thunderstorm.

Label

A caution label like the one is attached near the display module connector of the TM printers.

The label has the following meaning:

“The display module connector and the drawer kick-out connector use the same type of Ethernet connector; therefore, be sure not to connect the Ethernet connector cable or the telephone line to the display module connector or the drawer kick-out connector.”

Product Servicing

This product cannot be serviced at the component level. If damage occurs, the UB-E02 should be replaced as a unit.

vi

Rev. A

Image 8

Contents UB-E02 Technical Reference Guide Page Rev. a Revision Information Related Documents Contents of the GuideAbout This Guide EMC and Safety Standards Applied CE MarkingFCC Compliance Statement For American Users For Canadian UsersKey to Symbols GereäuschpegelLabel Safety PrecautionsProduct Servicing Environments for Setup Utility IntroductionOperating Environments Supported Operating SystemsSupported TM Printers How to Use this Guide Installation OverviewProgramming AppendixContents Rev. a Contents Xii Contents Rev. a Supported Operating Systems Supported Network ProtocolsOther Limitations Installation Installation PrecautionsSwitch UnpackingPart Names FunctionsUB-E02 Installation 4Installation Rev. a Page 6Installation Rev. a Initializing UB-E02 UB-E02 Status Sheet Printing3 Q3. Starting up the printer takes a long time FAQ2 Q2. The self test does not operate correctly UB-E02 Technical Reference Guide 10Installation Rev. a Setting the TCP/IP protocol in Your Operating System Setting the IP AddressSetting the IP Address using Epson TMNet WinConfig Windows UB-E02 Technical Reference Guide Windows NT Windows Installing Epson TMNet WinConfig Installation EnvironmentsInstallation with Windows Setting with the Epson TMNet WinConfig UB-E02 Technical Reference Guide Page Setting the IP Address Using the arp/ping Command Example ping Epson TMNet WinConfig Functions Tool Menu Time-out setting Menu BarSearch Options Settings Printer Print server TCP/IP Password Epson TMNet WebConfig Functions Opening ScreenTCP/IP Protocol Information and Settings General Information2.2 TCP/IP Information ApipaSnmp Information 2.4 TCP/IP Setting Snmp Communication Setting Snmp IP Trap 1 Setting Snmp IP Trap 2 Setting Administrator Setting Password Setting Reset Advanced Programming Samples Method of Printing to the UB-E02 Buffer of the UB-E02Direct Printing by PORT9100 For Windows Console4Programming Samples For Linux Commands Sent to a TM Printer When the Power is On Monitoring of the ASB statusPriorities of Printing Time-out for ConnectionPrinter Operation by the UDP Commands Commands PacketsReply data 2 03-0000 Retrieving Basic Information3 03-0010 Retrieving Status Set-up data 5 03-0012 Reset4 03-0011 Forced Transmission 7 03-0016 Clearing Connection Time-Out Timer 6 03-0013 Buffer FlashProgramming Sample For Windows Console12Programming Samples For Linux Rev. a 13Programming Samples14Programming Samples Features Printer ConnectionLine Display Connection OverviewHardware Specifications Software Specifications External appearance and connector locationsBasic Communications Protocols Printing Communications ProtocolsSnmp MIB Status Inquiry and Setting ProtocolsHttp IP Address Acquisition by Dhcp Automatic IP Address Assignment ProtocolsEnpc Manual Setting IP Address Assignment by ApipaInternal Settings Item ListInternal Parameter Setting Methods Setting with Exclusive utilitySetting with Browser Setting the IP Address with arp + pingUpgrade Methods InitializingVersion Upgrading Supported protocolEnvironmental Specifications Storage ConditionsDefinitions 2Definitions Rev. a Page Epson