Epson E02 manual Printer Connection, Line Display Connection, Features, Overview

Page 73

UB-E02 Technical Reference Guide

Chapter 5

Specifications

The UB-E02 can be installed in the TM-series printers as an interface board to provide 10 Base-T/100 Base-TX communications.

EPSON PRINTER	EPSON
WITH	PRINTER
UB-E02
Ethernet
(10Base-T/100Base-TX)

Host PC

5.1 Printer Connection

The interface board can be installed in TM-series printers that support the universal interface board system.

5.2 Line Display Connection

When the UB-E02 is connected, the DM connector on the TM unit cannot be used. Refer to the Supported TM Printers section in Chapter 1.

5.3 Features

5.3.1Overview

❏10 Base-T/100 Base TX Ethernet

❏Complies with TCP/IP protocol (LP, LPR, and socket communications)

❏The interface board system can be connected to a variety of TM printers with the universal interface

❏Board size: 70 ⋅ 58 mm {2.76 ⋅ 2.28"}

Rev. A

Specifications 5-1

Image 73

Contents UB-E02 Technical Reference Guide Page Rev. a Revision Information About This Guide Contents of the GuideRelated Documents CE Marking EMC and Safety Standards AppliedFCC Compliance Statement For American Users For Canadian UsersGereäuschpegel Key to SymbolsProduct Servicing Safety PrecautionsLabel Introduction Environments for Setup UtilityOperating Environments Supported Operating SystemsSupported TM Printers Installation Overview How to Use this GuideProgramming AppendixContents Rev. a Contents Xii Contents Rev. a Supported Network Protocols Supported Operating SystemsOther Limitations Installation Precautions InstallationUnpacking SwitchPart Names FunctionsUB-E02 Installation 4Installation Rev. a Page 6Installation Rev. a UB-E02 Status Sheet Printing Initializing UB-E022 Q2. The self test does not operate correctly FAQ3 Q3. Starting up the printer takes a long time UB-E02 Technical Reference Guide 10Installation Rev. a Setting the IP Address using Epson TMNet WinConfig Setting the IP AddressSetting the TCP/IP protocol in Your Operating System Windows UB-E02 Technical Reference Guide Windows NT Windows Installation Environments Installing Epson TMNet WinConfigInstallation with Windows Setting with the Epson TMNet WinConfig UB-E02 Technical Reference Guide Page Setting the IP Address Using the arp/ping Command Example ping Epson TMNet WinConfig Functions Menu Bar Tool Menu Time-out settingSearch Options Settings Printer Print server TCP/IP Password Opening Screen Epson TMNet WebConfig FunctionsTCP/IP General Information Protocol Information and SettingsApipa 2.2 TCP/IP InformationSnmp Information 2.4 TCP/IP Setting Snmp Communication Setting Snmp IP Trap 1 Setting Snmp IP Trap 2 Setting Administrator Setting Password Setting Reset Advanced Programming Samples Buffer of the UB-E02 Method of Printing to the UB-E02For Windows Console Direct Printing by PORT91004Programming Samples For Linux Monitoring of the ASB status Commands Sent to a TM Printer When the Power is OnPriorities of Printing Time-out for ConnectionCommands Packets Printer Operation by the UDP Commands3 03-0010 Retrieving Status 2 03-0000 Retrieving Basic InformationReply data 4 03-0011 Forced Transmission 5 03-0012 ResetSet-up data 6 03-0013 Buffer Flash 7 03-0016 Clearing Connection Time-Out TimerFor Windows Console Programming Sample12Programming Samples Rev. a 13Programming Samples For Linux14Programming Samples Printer Connection FeaturesLine Display Connection OverviewHardware Specifications External appearance and connector locations Software SpecificationsBasic Communications Protocols Printing Communications ProtocolsHttp Status Inquiry and Setting ProtocolsSnmp MIB Enpc Automatic IP Address Assignment ProtocolsIP Address Acquisition by Dhcp IP Address Assignment by Apipa Manual SettingItem List Internal SettingsSetting with Exclusive utility Internal Parameter Setting MethodsSetting with Browser Setting the IP Address with arp + pingInitializing Upgrade MethodsVersion Upgrading Supported protocolStorage Conditions Environmental SpecificationsDefinitions 2Definitions Rev. a Page Epson