Panasonic KX-TCD735ALM operating instructions Phonebook Audible Caller Ring Feature, Hold C Press

Phonebook

Audible Caller Ring Feature

When receiving a call, you can easily figure out who is calling with this feature. For example, if you store the phone number with name of John Miller into the base unit phonebook and record an audible caller ring as “Mr. Miller”, you can hear recorded sound after ringing when receiving a call from the same phone number you stored into the base unit phonebook. This feature requires Caller ID subscription. See page 56 for setting the audible caller ring ON/OFF.

with the Handset

Storing Names and Phone Numbers into the Base Unit Phonebook

Make sure that the power is ON (p. 15), and the unit is in the standby mode.

1 Press

.

6 Enter a phone number, up to 24 digits.

2 Press

or

until the arrow points

•Pressing

C erases the digit to the left of

the cursor. To erase all digits, press and

to “New Phonebook”, then press

.

hold C .

3 Press

or

until the arrow points

7 Press

.

to “Base Phonebook”, then press

.

8 Press

to select “Start”, then start

•The display shows the number of remaining

recording after a long beep. When finish

phonebook items, then “<Enter Name>”.

recording, press

.

•We recommend you to record as briefly as

Enter

New

Phonebook

possible (less than 3 seconds).

20

Memory Avail

•If you do not need to record, select “Skip”

or “No sound”, then press

.

<Enter

Name>

9 While “Save” is at the arrow, press

.

•A beep sounds and “Saved” is displayed.

•The display will return to “<Enter Name>”.

4 Enter a name up to 16 characters with

You can continue the storing procedure begin

with step 4. To return to the standby mode,

the keypad,

,

or

C .

press

or wait for 60 seconds.

•To select characters, see page 35.

5 Press

.

•If a pause is required for dialling, press

.

•“<Enter Phone No>” is displayed.

A pause can be stored in a phone number

counting as one digit (p. 48).

John

Miller

•You can exit the programming mode any time

<

Enter

Phone

No>

by pressing

.

•If the display shows “Memory Full” in step

2, the display will return to the standby mode.

You must clear the other caller information in

the phonebook (p. 41).

40