Ringer Option
56
with the Handset
Setting the Audible Caller Ring at Handset ON/OFFThe factory preset is OFF. This setting is for Handset only. If you desire to set the audible caller ring
on the base unit OFF, you must set the base unit ringer volume OFF (p. 70).
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1Press .
2Press or until the arrow points to
“Setting Handset”, then press .
3Press or until the arrow points to
“Ringer Option”, then press .
4Press or until the arrow points to
“Audible Ringer”, then press .
•The arrow points to the current setting.
5Press or to select “ON” or
“OFF”.
6Press .
•Abeep sounds.
•The display will return to “Audible
Ringer”. To return to the standby mode,
press or wait for 60 seconds.
•You can exit the programming mode any time
by pressing .
KX-TCD735ALM(E)-3(50~75) 2002.06.21 5:24 PM Page 56