If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed.

You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed.

Should the Permitted Attachment not operate when plugged into a socket, it is either faulty or unsuitable for operation with your telephone service. It should be returned to the store where purchased or to an Authorised Service Centre.

Service difficulties

If at any time a fault occurs on your telephone service carry out the following checks before you call for service:

Disconnect the Permitted Attachment and try using the service with the normal telephone.

If the telephone service then operates satisfactorily, the fault is in your Permitted Attachment. Leave

the Permitted Attachment disconnected and report the fault to its supplier or agent to arrange for repair.

If when using the telephone the service is still faulty, report the fault to “Service Difficulties and Faults” for attention.

You are required to keep this Permitted Attachment in good working order while it is connected to your telephone service. Its construction or internal circuit must not be modified in any way without permission.

WARNING

This cordless telephone system does not incorporate provision for secrecy of conversations. Appropriately tuned radio equipment and other cordless telephone systems in close proximity may be used by a third party to monitor and possibly interrupt conversations in progress when this system is on radio operation.

Do not connect the AC adaptor to any AC outlet other than the standard AC 220-240 V, 50 Hz.

Output voltage DC 9V, 500 mA.

The telephone is approved for use with the

PQLV1AL power supply.

CAUTION: Do not remove cover. Live parts inside.

Ringer Equivalence Number (REN):

This relates to the performance of the telephone when used in combination with other items of telephone. It enables the calculation of the maximum number of items of telephone that may be connected simultaneously to the line by summing the REN values of each item.

A maximum REN value of 4 should not be exceeded. The REN value of this telephone is 1

WARNING:

The phone may be unable to make emergency 000 calls under certainconditions:-

The portable handset battery needs recharging,

or has failed.

During a mains power failure.

When the Key Lock is set to ON.

When the Unit is in Direct Call Mode.

NOTE:

If you experience any problems with the normal use of your telephone, you should unplug it from the telephone outlet and connect a known working telephone in its place. If the known working telephone still gives problems, then please contact the customer service department of your carrier or service provider. If it operates properly, then the problem is likely to be a fault in your telephone. In this case, contact your supplier for advice. Your carrier or service provider may charge you if they attend a service call that is not due to telephone supplied by them.

3

Page 3
Image 3
Panasonic KX-TCD735ALM operating instructions Service difficulties, PQLV1AL power supply, Ringer Equivalence Number REN