Panasonic KX-TCD735ALM Press While Save Phonebook is at Arrow, press, Keypad, , or C, Press twice

with the Handset

Storing Caller List Information into the Handset Phonebook

You can store the Caller List information into the phonebook. You can categorise the caller information in the phonebook up to 9 categories, then you can select one of 3 display backlight colours and one of 20 ringer types for each private category–Private Category Feature (p. 33).

Make sure that the power is ON (p. 15), and the unit is in the standby mode.

Chapter

1Press or .

•The most recent caller’s information is displayed.

2Press repeatedly to search from the

most recent call or press repeatedly to search from the oldest call until the

arrow points to the caller information you desire to store.

3Press .

4While “Save Phonebook” is at the

arrow, press .

•The display shows the number of remaining phonebook items, then “<Enter name>”.

<Enter Name> 0123456789

5Enter the name up to 16 characters with

the keypad, , or C .

•To select characters, see page 35.

•If the phone number requires editing, press

and see step 5 on page 29. When

finished, press then go to step 7.

6Press twice.

7Press or to select the desired private category number 1 to 9 or OFF,

then press .

8While “Save” is at the arrow, press .

•A beep sounds and “Saved” is displayed.

•The display will return to caller list. You can continue the storing procedure begin with

step 3. To return to the standby mode,

press or wait for 60 seconds.

•If a pause is required for dialling, press . A pause can be stored in a phone number

counting as a digit (p. 48).

•You can exit the programming mode any time

by pressing .

•If the display shows “Memory Full” in step 3, the display will return to the standby mode. You must clear the other caller information in the phonebook (p. 38).

2 Cordless Telephone

31