45
Chapter 2 Cordless Telephone
with the Handset
Phonebook Copy
You can copy the item in the handset phonebook between the handsets registered in the same base
unit. The phonebook copy must be operated in intercom mode (p. 98).
Ex. Handset 2 is copying the handset phonebook to Handset 1 during an intercom call.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
Handset 2 (Sender):
1Press .
2Press or until the arrow points
to “Send Phonebook”, then press .
•The phonebook is displayed.
3Press or until the name you
desire to copy is displayed, then press
.
4Press or until the arrow points
to “Copy Entry”, then press .
•“Copy Proceeding” is on the display
with beep sound and the selected
information is copied.
•After copying is completed, a beep sounds
and “Copy Complete” is displayed.
•After a few seconds, the display will return
to the intercom call.
•If “Memory Full” is displayed, the receiver
handset memory is full.
•If “Copy Failure” is displayed, the receiver
and/or sender did not prepare for copying
within 60 seconds.
Handset 1 (Receiver):
1During an intercom call, press .
2Press or until the arrow points
to “Recv Phonebook”, then press .
•“Copy Proceeding” is on the display.
•If “Memory Full” is displayed, the receiver
handset memory is full.

To copy a selected item in the handset phonebook

KX-TCD735ALM(E)-2(32~49) 2002.06.21 5:02 PM Page 45