Panasonic KX-TCD735ALM With the Handset, Keypad, , or C, Enter a phone number, up to 24 digits

Phonebook

You can store up to 200 names and phone numbers in the handset phonebook. All phonebook items are automatically stored by the first word in alphabetical order.

If you receive a call from the same phone number you stored with name in the phonebook, the display will show the caller name and phone number (p. 26).

You can categorise the items in the handset phonebook up to 9 categories, then you can select one of 3 display backlight colours and one of 20 ringer types for each private category–Private Category Feature (p. 33). You can store names and phone numbers in the base phonebook up to 20 and record the audible caller ring for each item–Audible Caller Ring Feature (p. 40)

You can make a call with the phonebook (p. 39, 42).

with the Handset

Storing Names and Phone Numbers into the Handset Phonebook

Make sure that the power is ON (p. 15), and the unit is in the standby mode.

1Press .

2Press or until the arrow points

to “New Phonebook”, then press .

3Press or until the arrow points to

“H/set Phonebook”, then press .

•The display shows the number of remaining phonebook items, then “<Enter Name>”.

Enter

New Phonebook

200-Memory Avail

<Enter Name>

4Enter a name up to 16 characters with

the keypad, , or C .

•To select characters, see page 35.

5Press .

•“<Enter Phone No>” is displayed.

John Miller

<Enter Phone No>

6Enter a phone number, up to 24 digits.

•Pressing C erases the digit to the left of the cursor. To erase all digits, press and hold C .

7Press .

8Press or to select the desired private category number 1 to 9 or OFF,

then press .

9While “Save” is at the arrow, press .

•A beep sounds and “Saved” is displayed.

•The display will return to “<Enter Name>”. You can continue the storing

procedure begin with step 4. To return to

the standby mode, press or wait for 60 seconds.

•If a pause is required for dialling, press . A pause can be stored in a phone number

counting as one digit (p. 48).

•You can exit the programming mode any time

by pressing .

•If the display shows “Memory Full” in step 2, the display will return to the standby mode. You must clear the other caller information in the phonebook (p. 38).

32