25
Chapter 2 Cordless Telephone
Selecting the Ringer Type for Paging
You can select one of 20 ringer types for paging.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1Press .
2Press or until the arrow points to
“Setting Handset”, then press .
3Press or until the arrow points
to “Ringer Option”, then press .
4Press or until the arrow points
to “Paging Type”, then press .
•The arrow points to the current setting.
5Press or to select the desired
ringer type.
•Each time you press a button, selected
ringer type sounds.
6Press .
•Abeep sounds.
•The display will return to “Paging
Type”. To return to the standby mode,
press or wait for 60 seconds.
Paging Type
H
Ringer 1
Ringer 2

From the handset to the base unit

1Handset:
During a call, press then .
•
The call is put on hold and “ ” is displayed.
•If the base unit user does not answer,
press .
2Base unit:
Press or to answer the page.
3Transferring a call:
Handset: Press .
•The transfer is completed.
The base unit user can answer the call.
OR
Ending the intercom:
Handset: Press .
•The handset returns to the call.
INT
INT
0
INT

From the base unit to the handset

1Base unit:
During a call, press .
•The call is put on hold.
•If the handset user does not answer, press
.
2Handset:
Press to answer the page.
3Transferring a call:
Base unit: Press .
•The transfer is completed. The handset
user can answer the call.
OR
Ending the intercom:
Base unit: Press .
•The base unit returns to the call.
with the Handset
Transferring a Call Using the Intercom
The intercom can be used during a call. This feature enables you to transfer a call between the
handset and the base unit.
KX-TCD735ALM(E)-1(02~31) 2002.06.21 4:48 PM Page 25