Epson 214D-1 user manual Configuration, Run

Page 35

Configuration 27

5. Configuration

The Configuration process enables the Setup Parameters to be configured, as well as enabling the input signals to be checked.

The configuration process can be entered in one of two ways:

1By connecting a wire link (or switch) to the rear terminal strip across terminals 1 and 2

2By pressing the TOTAL key and while holding, pressing the RESET key. Both keys must then be held for approximately 6 seconds. This second method of access can be disabled during the configuration so that it is only possible to enter the configuration process via the link across terminals 1 and 2.

The key switch actions are during Configuration are as follows:

RUN

changes a flashing digit to the next digit.

DISPLAY increments a flashing digit or changes a parameter selection.

BATCH SET resets a flashing digit to zero.

STOP

steps through the configuration sequences.

Note that the arrows in the RUN and DISPLAY key switches indicate that these switches can be used to change and increment digits respectively.

In stepping through the configuration sequence, the Parameter Description is always displayed first, followed by the actual value or parameter. When a value or parameter can be changed, it is always shown as flashing and the LED's in the switch panels are lit if that key switch can be used to change a value.

On first entering the Configuration routine, the display will show:

CAL

Setup Program parameters

Batch

Enter Batch parameters

Option

Options (if installed)

Test

Check Input Signals

End

Exit to Normal Operation

HP289

Page 34 Page 36
Image 35
Page 34 Page 36
Contents USER’S Manual HP289 HFC Warranty Contents HP289 Introduction Model 214D- a Model Number DesignationIntroduction 2A Introduction 2B This page intentionally left blank HP289 General SpecificationPulse Output Operation Front Panel Operation Setting the Batch QuantityDisplayed Information ResettingStarting a Batch StoppingAccumulated Total Limit on Batch SizeBatch Operations Page Control Relays Flow Alarm Signal TimeoutEnd-of-Batch End-of-Batch SignalAuto Restart Automatic Overrun Compensation Calculation of Rate and Total Frequency Input = fxHFiltering 103 For Example Total ConversionOutput Pulse and Flow Alarm Page Hardware OptionsRS232/422/485 Interface Option RS422 Interface HP289 Multipoint CommunicationRS485 Interface HP289 Printer Communication ProtocolComputer RUN ConfigurationPage Base Configuring the Setup ParametersStep Display Description Text Dis Signal Timeout in seconds Setting to Disables this featureEntering the Batch Parameters EOB Date Configuring the OptionsEcho Checking the Input Signal Input Circuit for the 214D Series Input CircuitsGeneral Specification Switch SettingsInput Circuits Frequency Input Circuit HP289 Page Page Remote Key Switches General InstallationRC Networks for Interference Suppression Terminal RS232/422/485 Option Terminal Wiring DesignationsTerminal Relay Option & Switches TerminalDescriptionTrouble Shooting Instrument acting erratically No end of batch, pulse output, or flow alarmCounting erratically Configuration Errors Error CodesInput Errors Output ErrorsFront Panel IndexTerminal Wiring

214D-1 specifications

The Epson 214D-1 is a powerful and compact printer designed for both personal and professional use, standing out in the crowded market of small-format printers. This sleek device leverages advanced printing technologies to deliver high-quality prints with remarkable efficiency and speed.

One of the hallmark features of the Epson 214D-1 is its use of PrecisionCore technology, which enables it to produce sharp, detailed images and crisp text. This technology utilizes a unique micro-electromechanical system (MEMS) for precision droplet control, resulting in prints that boast vibrant colors and enhanced clarity. The printer is capable of handling a variety of media types, including plain paper, photo paper, and even specialty media, making it a versatile tool for various printing needs.

The Epson 214D-1 also features a user-friendly interface, complete with an intuitive control panel that simplifies operation. The printer supports wireless connectivity options, allowing users to print directly from their smartphones and tablets via Wi-Fi Direct or through mobile printing apps. This flexibility makes it easy to print documents and photos on the go, enhancing productivity for both home users and professionals alike.

With a compact design, the 214D-1 can fit easily into small home offices or workspaces, optimizing space without sacrificing performance. The printer also boasts a fast printing speed of up to 15 pages per minute for black-and-white documents and approximately 8 pages per minute for color prints, ensuring that users can keep pace with demanding workflows.

In terms of sustainability, the Epson 214D-1 is designed to be energy efficient, consuming less power during operation and standby modes. Additionally, it supports high-capacity ink cartridges that provide a lower cost-per-page, reducing the frequency of cartridge replacements and minimizing environmental impact.

Overall, the Epson 214D-1 stands as a reliable option for any individual or business looking for a compact, high-performance printer that excels in both quality and efficiency. With its innovative features and technologies, it is well-suited to meet a range of printing requirements while delivering exceptional results each time.
Top Page Image Contents