Epson 214D-1 user manual Configuring the Setup Parameters, Base

Configuration 29

5.1Configuring the Setup Parameters

Step	Display	Description	Text
			Ref
1	CAL	Setup Program Parameters
	BATCH	Set Batch Parameters	5.2
	OPTION	Options (if installed)	5.3
	TEST	Check Input Signals	5.4
	END	Exit to normal operation
	The following steps are displayed when CAL is selected.
2	RESTOT	Reset all totals to zero.
		To clear all totals (resettable and
		accumulated) press the BATCH SET key
		once.
3	SCALE	Scaling Factor.
	Fact	Enter the Scaling factor (K-factor) of the	3.3.1
		flowmeter.

4F dPt Number of decimal points with which the Rate

is to be displayed between 0 to 0000.

5	t.base	The Timebase with which the Rate is	3.2.1
		calculated must be entered as:
	60secs	units/min
	hours	units/hour
	days	units/day
	secs	units/second

6FILTER The filter constant for filtering the rate display. 3.3.2

1 No filtering.

	to
	99	Very heavy filtering.
7	TOTCON A division factor to convert the totals to		3.30
		different units from those used for rate (e.g.,
		gallons/min and barrels).
	1	Rate and totals have the same engineering
		units.
	x.xxxx	Other factors can be programmed between
		0.01 and 2000.

8t.dPt Number of decimal points with which the resettable total is displayed between 0 to 00.

HP289