Kodak E-PLUS SLIDE, KKE PLUS, J-E PLUS Adjustment Speciﬁcation, Adjusting the Cycle Solenoid

Page 26

SERVICE MANUAL

Section 2: Adjustments

Adjustment Speciﬁcation

Use T-BAR TL-3003 to bend the CYCLE LEVER to adjust the CYCLE SOLENOID.

Adjusting the CYCLE SOLENOID

MECHANISM

ASSEMBLY

T-BAR	CYCLE
TL-3003	CYCLE
	BAR

A091_0007HCA

A091_0007HA

Warning

Dangerous Voltage

[1]Connect the main power.

Important

•The CYCLE SOLENOID must operate correctly to do this adjustment.

•The MECHANISM ASSEMBLY does not have to be removed to do this adjustment.

[2]Do the removal for the LOWER HOUSING ASSEMBLY.

[3]Bend the CYCLE LEVER up or down. Use T-BAR TL-3003.

[4]Energize the projector.

[5]Press the “FORWARD” BUTTON to check for correct operation.

[6]Press the “REVERSE” BUTTON to check for correct operation.

[7]Do the steps above until the FORWARD and REVERSE functions operates correctly.

26	30APR96 – SM4530-1

Image 26

Contents Kodak Ektagraphic Table of Contents Adjusting the Focus Light Path Auto Focus Models PIN Special Application PlugReplacing the Lower Housing Assembly Installing the Lower Housing AssemblyReplacing the FAN Shaft Assembly Remove the Torx Screw from the Blower Cover AssemblyPainted Projector Installing the FAN Shaft Assembly Replacing the MotorWorm Pulley Screw Mechanism Belt Installing the MotorReplacing the Worm Pulley and Mechanism Belt MotorInstalling the Worm Pulley and Mechanism Belt Replacing the Thermal Fuse AssemblyInstalling the Thermal Fuse Assembly Installing the Lamp Module Receptacle Replacing the Lamp Module ReceptaclePlunger Assembly Replacing the Cycle Solenoid AssemblyInstalling the Cycle Solenoid Assembly Pulley ShaftDark Replacing the Mechanism AssemblyMechanism Assembly Installing the AUTO-FOCUS Bracket Assembly Installing the Mechanism AssemblyReplacing the AUTO-FOCUS Bracket Assembly Worm Pulley Auto Focusscrew Cyclebracket Solenoid AssemblyReplacing the CAM Stack Assembly and Cycle Lever Assembly Remove the Light Baffle Installing the CAM Stack Assembly and Cycle Lever Assembly Replacing the Lamp Socket Terminal ASSEMBLY, N.P Installing the Lamp Socket Terminal AssemblyRetaining Ring Spring Washer Socket PIN Replacing the Lamp Socket Terminal ASSEMBLY, Painted ModelsLamp Module AUTO-FOCUS Defeat Switch Replacing the Lens Mount Assembly Auto Focus ModelInstalling the Lens Mount Assembly Auto Focus Models Replacing the Lens Mount Assembly Non Auto Focus Model Installing the Lens Mount Assembly Non Auto Focus ModelReplacing the AUTO-FOCUS Switch Assembly Installing the AUTO-FOCUS Switch Assembly Clamp Lever Screw Replacing the Focus Shaft Assembly Auto Focus Models Lens Mount Assembly SpringFocus Shaft Spring Assembly Focus Motor Bracket Spacer Installing the Focus Shaft AssemblyReplacing the Focus Shaft Assembly Non Auto-Focus Models Installing the Focus Shaft Assembly Mechanism Assembly BAR Cycle Adjustment SpeciﬁcationAdjusting the Cycle Solenoid Adjusting the Indexer Lever Assembly Adjusting the Slide Lift Lever Manual Slide Lift Lever Guage TL-3001 SelectAdjusting the Slide Lift Lever Power Adjusting the Zero Position Switch Zero Position Switch NUTSpring Hook TL-1165 Auto Focus Bracket Assembly Adjusting the Focus Light Path Auto Focus ModelsAdjustment Tool AUTO-FOCUS Target Slide TL-3002Target Slide Adjusting the NullProjection TAB Lens AUTO-FOCUS Adjusting the Photocell Clamp PAD AUTO-FOCUS Assembly Target SlidePAD Adjusting the Clamp PAD Assembly Screw NUT Clamp PAD AssemblyAdjusting the Dark Shutter Dark Shutter Pressure PADWorm Pulley Assembly CAM Stack Assembly Cycle Levers FANA0910023HA A0910022DA AUTO-FOCUS Target Slide Adjustment T-BARAUTO-FOCUS Gauge Super LubeSpecifications Ground PIN Remote ControlPIN Special Applications Diagnostics Main Motor VoltagesPhotocell Voltages Zero Position SwitchShutter Switch Forward Tray CycleKodak EC-3 Remote Control PIN Remote Cord Plug VoltagesSmall Component Board Assembly 256809 Voltages Power, Illumination, and Cooling Malfunctions Voltage Speciﬁcations General PartsSuper Lube TL-4276 Slide Transport MalfunctionsControl Cycle LeverEccentrics Lever AssemblyPower Slide Lift Lever Direction LeverSwitch Focus Malfunctions Gate Mechanism BoardCheck that the alignment of the Target Eastman Kodak Company

Related manuals

Manual 54 pages 34.68 Kb