Kodak E-PLUS SLIDE, KKE PLUS, J-E PLUS service manual Voltage Specifications General Parts

Diagnostics

Voltage Specifications - General Parts

Part	Procedure	Voltage
FOCUS MOTOR	None	8.5 V AC
CYCLE SOLENOID	Press the REVERSE BUTTON.	39 W, 18.7 V DC
RACK SOLENOID	None	39 W, 10 V AC
LAMP RECEPTACLE	None	82 V AC, approximately 85-86 V AC without a
		LAMP MODULE installed
DROPPING RESISTOR	Move to the LO LAMP position.	3.0 W, 10.6 V AC drop across
Power, Illumination, and Cooling Malfunctions

Malfunction		Check
The MOTOR does not operate.	1.	Check the continuity across the THERMAL
		FUSE ASSEMBLY, and MOTOR FUSE.
	2.	Check that the primary voltage on the MAIN
		MOTOR is correct.
	3.	Check that the voltage on POWER
		SWITCH is correct.
The FAN does not operate, MOTOR operates.	1. Check that the FAN BELT is not broken.
	2.	Check and remove obstructions in the FAN
		area.
There is excessive noise in the FAN.	1.	Check and remove obstructions in the FAN
		area.
	2.	Check that the tension is correct on the
		FAN BELT.
	3.	Check that the FAN BELT is clean.
	4.	Check the condition of the BEARING in the
		FAN ASSEMBLY.
The LAMP does not operate.	1.	Check the LAMP for damage.
	2.	Check the LAMP RECEPTACLE
		ASSEMBLY for damage and correct
		voltage.
	3.	Check the LAMP TERMINAL ASSEMBLY
		in the LAMP MODULE ASSEMBLY for
		damage.
The LO LAMP does not operate.	1.	Check that the W of the DROPPING
		RESISTOR is 3 W.
	2.	Check that the wire connections on the
		POWER SWITCH are correct.
	3.	Check the POWER SWITCH for correct
		operation.
There is an obstruction in the light path.	1.	Check the DARK SHUTTER for correct
		operation. See the adjustment for the
		DARK SHUTTER.
	2.	Check the LIGHT BAFFLE in the
		MECHANISM for damage; it should not
		cause a jam in the SHUTTER.

SM4530-1 – 30APR96 47