Starting the Presentation
Starting the Presentation
We recommend turning on the projector and image sources in the order listed here.
Note: You might not be using all of these components for your presentation.
•Video source such as VCR, DVD or digital camera.
•Audio source if different from your video source or computer
•Projector
•Computer
1.Connect the signal cable to the computer or video source.
2.Connect the power cord to the projector and to a power source. The Power light begins to blink.
3.Turn on the presentation components in the order listed.
To turn on the projector, remove the lens cap and press the Power button on either the remote control or the keypad.
English
Power Menu
EnterNext
Adjust
Volume
power button
POWER
MENU
ADJUST
ENTER
NEXT
The Power light stays a steady green when the lamp comes on.
Either the title screen or the image from the image source appears.
Note: Many laptop computers do not automatically turn on their external video port when another display device is connected. Refer to your computer’s user guide for the function key or command that activates the port. MAC users may need to turn on SimulSCAN or monitor mirroring. Refer to the computer manual.
7