Kodak V600 manual Setting Up the Image Source

Page 18

KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector

Setting Up the Image Source

The features that are available on the Setup tab depend on the type of image source that you are using.

Computer Source

Video Source

1.Press Menu and use the Adjust + - buttons to go to the Setup tab.

2.Use the Next button to select a feature.

3.Use the Adjust + - buttons to select an option for the selected feature.

If you wish to return to the factory default settings, use Next to highlight Reset and press Enter.

Source options are computer, video and S-video. When you change sources, a source status message appears indicating if the projector is receiving a signal from that source.

Signal is received:

No signal:

14

Image 18

Contents Page Safety Certifications Table of Contents Safety Introduction What’s in the BoxOnline Services If You Need AssistanceFaxed Information Telephone Customer Support HK/PRC Projector Features Connecting the Projector Starting the Presentation Page Using the Remote Control and Keypad Positioning the Projector V600 screen sizes areV600 Zoom screen sizes are Using Kodak Image Manager Adjusting the Display and Volume Setting Up the Image Source Setting Up the Image Source Selecting a Language To reset lamp hours Checking the StatusTurning Off the Projector To turn off the projectorTransporting the Projector Maintenance Changing the Lamp ModuleMaintenance Cleaning the Projection Lens Cleaning the Exterior CaseCleaning the Air Filter SurmhfwruTroubleshooting Power IndicatorImage Quality Problem Solution Colors Remote Control SoundLamp Image Source English Safety Safety DefinitionsProjector Safety Battery Safety Specifications NTSC/NTSC PAL B/D/G/H/I/K/L/N/M Secam B/D/G/H/K/L Specification V600 V600 Zoom Page Warranty Warranty Time PeriodWarranty