Kodak V600 manual Turning Off the Projector, To turn off the projector

Page 22

KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector

Turning Off the Projector

Turn off the projector and image sources in the order listed here.

Note: You might not be using all of these components for your presentation.

•Computer

•Projector

•Audio source if different from your video source or computer

•Video source such as VCR, DVD or digital camera.

To turn off the projector:

1.Press the Power button on the keypad or remote control. A confirmation screen appears.

2.Press the Power button again to confirm.

The lamp turns off immediately but the fan continues to run until the projector cools down.

The Power light continues to blink after the projector has cooled and as long as the live power cord is connected to the projector.

18

Image 22

Contents Page Safety Certifications Table of Contents Safety Introduction What’s in the BoxIf You Need Assistance Online ServicesFaxed Information Telephone Customer Support HK/PRC Projector Features Connecting the Projector Starting the Presentation Page Using the Remote Control and Keypad Positioning the Projector V600 screen sizes areV600 Zoom screen sizes are Using Kodak Image Manager Adjusting the Display and Volume Setting Up the Image Source Setting Up the Image Source Selecting a Language To reset lamp hours Checking the StatusTurning Off the Projector To turn off the projectorTransporting the Projector Maintenance Changing the Lamp ModuleMaintenance Cleaning the Projection Lens Cleaning the Exterior CaseCleaning the Air Filter SurmhfwruTroubleshooting Power IndicatorImage Quality Problem Solution Colors Remote Control SoundLamp Image Source English Safety Definitions SafetyProjector Safety Battery Safety Specifications NTSC/NTSC PAL B/D/G/H/I/K/L/N/M Secam B/D/G/H/K/L Specification V600 V600 Zoom Page Warranty Warranty Time PeriodWarranty