Safety
Caution: Never operate your projector without the lamp module or lamp module door. Doing so may damage the projector.
Caution: Proper ventilation is important. Don’t block ventilation openings. Never operate this projector in an enclosed area. Do not place the projector on a tablecloth or other soft covering that may block the vents. With ceiling installations, use approved mounting hardware. Do not put the projector near heat ducts, air cleaners, transformers or other electrical devices. For permanent installations follow local codes.
Caution: Do not touch the glass portion of the new lamp module with your hands or allow it to touch other objects as this may damage it and shorten its operational life.
Caution: Do not drop the lamp module as the glass may shatter.
Battery Safety
•Read and follow all warnings and instructions supplied by the battery manufacturer.
•Keep batteries away from children.
•Store batteries in their original packaging.
•When inserting batteries, verify that the (+) and
•Replace all batteries of a set at the same time.
•Do not mix new batteries with used ones.
•Do not use batteries of different chemistries, capacities, brands or sizes together. Leakage could result.
•Do not disassemble, recharge, or
•Do not subject batteries to high temperature or fire.
•Discard used batteries according to all applicable local and national regulations.
•In the unlikely event of contact with battery electrolyte, customers in the U.S. can contact the Kodak Information Center (KIC) at
English
33