|
| Troubleshooting |
Lamp |
| |
|
|
|
| Problem | Cause and Solution |
|
|
|
|
|
|
| No light is coming from the | • Make sure that the power cord is |
| lamp. | properly connected to a fully functional |
|
| AC electric outlet. The Power light |
|
| blinks when the power is connected but |
|
| the projector is not turned on. The |
|
| Power light is a steady green when the |
|
| lamp is running. |
|
| • Make sure that the power cord is |
|
| properly connected to the projector. |
|
| • Make sure that you have removed the |
|
| lens cap on the projector lens at the front |
|
| of the projector. |
|
| • Make sure you have pressed the Power |
|
| button and the Power light is a steady |
|
| green. |
|
| • Check the projector's lamp to make sure |
|
| that it is securely connected in the lamp |
|
| module. |
|
| • Make sure that the lamp module door is |
|
| fully closed. |
|
| • Make sure that the cable connectors do |
|
| not have any bent pins. |
|
| • Replace the lamp. |
|
|
|
| Lamp shuts off. | • A minor power surge may cause the |
|
| lamp to shut off. Press the Power button |
|
| twice to turn off the projector. (The |
|
| Power light continues to blink and the |
|
| fan continues to run until the projector |
|
| cools down.) Wait at least three minutes, |
|
| then press the Power button again. |
|
| • Replace the lamp module. |
|
|
|
English
29