Image Source

KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector

Problem		Cause and Solution


The S-Video image source	Some inexpensive cables are not
does not appear.	compatible with the projector. Be sure to
	use the cable that came with your
	projector.

Only the start-up screen	•	Verify that the cables are connected
appears and not the image		correctly. See “Connecting the
from the image source.		Projector” on page 6.
	•	Verify that the proper image source is
		connected and that it is selected on the
		Setup tab of the menus.
	• Make sure that the image source is
		turned on.
	• Turn off everything and power up again
		in the proper order. See “Turning Off the
		Projector” on page 18. See “Starting the
		Presentation” on page 7.
	•	Make sure that your laptop's external
		video port is turned on. See the
		computer manual for details.

The image source is	•	Verify that the cables are connected
connected but a No Signal		correctly. See “Connecting the
message appears.		Projector” on page 6.
	•	Verify that the proper image source is
		connected and that it is selected on the
		Setup tab of the menus.
	• Make sure there are no bent pins in the
		connectors.
	• Make sure the image source is turned
		on.
	• Turn off everything and power up again
		in the proper order. See “Turning Off the
		Projector” on page 18. See “Starting the
		Presentation” on page 7.
	•	Make sure that your laptop's external
		video port is turned on. See the
		computer manual for details.