Device - Multifeed tab Multifeed detection aids in document processing by detecting documents that may go through the feeder overlapped. Multifeeds can happen due to stapled documents, adhesives on documents, or electrostatically charged documents.
Length Detection — allows you to select the maximum length of the documents in your job set. If the scanner detects a document of that length or longer, it will determine that a multifeed has occurred. You can turn this option off or set a length up to 34.5 inches.
Action When Detected — select what action you want the scanner to take when a multifeed is detected. With all options, the condition will be logged in the scanner.
•Stop Scanning: scanning will stop and control will return to the scanning application (i.e., ends the job). Verify that the paper path has been cleared and restart the scan session from the scanning application.
•Continue Scanning: the scanner will continue to scan.
Play sound on PC — turn this option on if you want the PC to make a sound when a multifeed is detected. You can click the Browse button to select the desired .wav file.
NOTE: The sound on the PC may not occur at the exact time the multifeed is detected by the scanner.
70 |
|