Kodak A-61602 manual

Diagnostics - Debug tab The Debug tab allows you to store the communications between the scanner and a scanning application to a file that can be reviewed later. In addition, the resulting images (both before and after image processing has been done) can be saved.

Logging — saves the communications between the scanner and a scanning application to a file for later review. Click the drop-down box to select from Off (the default), On or Custom. It is suggested that you do not use the Custom setting unless directed to do so by Kodak support personnel.

Flag — by default, this is 1. Leave the flag at 1 unless instructed to use another value by Kodak support personnel.

Filter — captures only those items in the scanner to the application communication stream desired and filters out anything else. Options are x, y and z.

Images - Received From Scanner — normally, it is not necessary to save the images received from the scanner before your selected image processing options are applied. Use this checkbox when instructed by Kodak support personnel.

•Save: click this checkbox to save raw images from the scanner (before image processing is applied).

•File prefix: use a relevant file prefix to more easily find and sort the saved images. Raw is the default.

•Held in memory: determines the number of images to save before the images are overwritten. Normally, only one or two are needed. Adjust as necessary.

A-61602 January 2008 73