Kodak i60, i50 manual Scsi interface device ID, Setting the Scsi terminator

Page 12

SCSI interface device ID	When you have several devices on a SCSI chain, you may need to adjust the SCSI
	ID selector on the scanner. This selector assigns a specific device ID to the scanner.
	If the assignment conflicts with an existing SCSI device, select a new ID.
	NOTE: The factory setting for the scanner is ID 6. ID 0 is usually assigned to an
	internal hard disk drive and ID 7, ID 8, and ID 9 are not in actual use. The
	scanner will not operate properly if the SCSI ID is set to ID 7, ID 8, or ID 9.
	• Using a suitable tool, turn the SCSI ID selector switch until the arrow points to the
	desired ID number.

Setting the SCSI terminator

SCSI ID selector

SCSI terminator switch

The scanner comes with a built-in SCSI terminator. The terminator on/off switch is located on the scanner between the SCSI cable connectors.

•If the scanner is the only or the last device in a SCSI chain, place the terminator switch in the ON position.

•If the scanner is to be located between the computer and another SCSI device, place the terminator switch in the OFF position.

A-61182 October 2001

7

Image 12

Contents User’s Guide Contents Requirements and software installation Scanning your documentsMaking the most of your scanned images Lock scale Information Maintenance TroubleshootingSpecifications Introduction Safety Safety and regulatory agency approvalsAcoustic emission Electromagnetic compliance statements For the United StatesFor Japan Scanning specifications Acceptable paper sizesDocument types to avoid in the ADF ADF automatic document feederInstallation PrecautionsShipping switch Unlocking the scannerMaking connections Locking the scannerSetting the Scsi terminator Scsi interface device IDAdjusting the trays ADF trayPowering up the scanner Output trayTurning on the scanner Turning off the scanner Requirements and software installation Installing the scanner driversUsing the ADF Using the flatbedScanning your documents Loading documentsScanning with Twain or Isis Choose Select Source or Select Scanner on the File menuSelect your Kodak scanner model Making the most of your scanned images Scan MethodImage Type Resolution Scanner Settings ApplicationResolution dpi TipsBrightness Contrast Enhancing your images Invert Mirror Preview Auto-Area Paper Size UnitsDescreen Sharpen Color Adjustment Advanced SettingsAuto Level Highlight / Shadow Curves Color BalanceHue Saturation Lightness Color Drop-out TipCustom Settings Scan SettingsSaving a scan settings file Using a scan settings fileConfiguration Settings Other tools Width Height Size Lock scale InformationStarting the final scan Preview Zoom View Scan TwainExit Maintenance Cleaning the glass scanning areasCleaning the ADF Replacing the ADF snap-in feed module Troubleshooting ProblemSolution Color image quality is not acceptable Getting service Equipment disposal Scanner supplies Catalog NumberSpecifications Document