Scanning your documents
Loading documents
Using the ADF
Make sure that the scanner is on and has completed its
Use the ADF to feed multiple documents automatically in a batch.
1.Fan documents before loading to prevent paper jams.
2.Place the documents face down under the balance wire in the ADF tray, with the leading edges in the auto feeder entrance.
3.Adjust the left and right guides until they are snug against the document sides.
Original document
ADF tray
Left guide
Right guide
Balance wire
Using the flatbed | Use the flatbed to scan documents that cannot be scanned using the ADF. | |
| 1. | Place the document face down on the glass platen. |
| 2. | Position the document with the upper right corner aligned with the reference mark. |
Document cover
Reference mark
Original document
Glass platen
Reference frame
11 |