Kodak i50 Scanning with Twain or Isis, Choose Select Source or Select Scanner on the File menu

Page 17

Scanning with TWAIN or ISIS

1.Open your scanning application.

2.Choose Select Source or Select Scanner on the File menu.

If the Select Source or Select Scanner command is not available on the File menu, see your application’s user’s guide to determine how the application link is used.

A dialog box with a list of scanning sources appears.

3.Select your Kodak scanner model.

You need to select the source only once, unless you want to choose another scanner.

4.Place the document to be scanned in the ADF or on the flatbed glass platen.

5.Pull down the File menu and choose Acquire.

A dialog box containing scanning features appears. (The TWAIN dialog box is shown below.)

6.Select a scanning method on the Scan Method drop-down menu.

7.Select a scanning mode on the Image Type drop-down menu.

8.Select a scanning resolution on the Resolution drop-down menu.

9.Select the settings for the scanning features (e.g., Sharpen, Descreen, etc.) that you want to use.

NOTE: Refer to the driver feature descriptions in the following section, “Making the most of your scanned images.”

10.Click on the Preview button to preview your document(s).

11.Click on the Scan (TWAIN) or OK (ISIS) button scan your document(s).

12

A-61182 October 2001

Image 17
Contents User’s Guide Contents Making the most of your scanned images Requirements and software installationScanning your documents Lock scale Information Specifications MaintenanceTroubleshooting Introduction Acoustic emission SafetySafety and regulatory agency approvals For Japan Electromagnetic compliance statementsFor the United States Acceptable paper sizes Scanning specificationsDocument types to avoid in the ADF ADF automatic document feederPrecautions InstallationShipping switch Unlocking the scannerLocking the scanner Making connectionsScsi interface device ID Setting the Scsi terminatorADF tray Adjusting the traysTurning on the scanner Turning off the scanner Powering up the scannerOutput tray Installing the scanner drivers Requirements and software installationUsing the flatbed Using the ADFScanning your documents Loading documentsSelect your Kodak scanner model Scanning with Twain or IsisChoose Select Source or Select Scanner on the File menu Scan Method Making the most of your scanned imagesImage Type Scanner Settings Application ResolutionResolution dpi TipsBrightness Contrast Invert Mirror Preview Auto-Area Paper Size Units Enhancing your imagesAuto Level Descreen Sharpen Color AdjustmentAdvanced Settings Highlight / Shadow Color Balance CurvesHue Saturation Lightness Tip Color Drop-outScan Settings Custom SettingsSaving a scan settings file Using a scan settings fileConfiguration Settings Width Height Size Lock scale Information Other toolsExit Starting the final scanPreview Zoom View Scan Twain Cleaning the glass scanning areas MaintenanceCleaning the ADF Replacing the ADF snap-in feed module Solution TroubleshootingProblem Color image quality is not acceptable Catalog Number Getting service Equipment disposal Scanner suppliesSpecifications Document