Kodak Series 3 manual Installing and removing the paper tray, Pull the paper tray out to remove it

Page 13

Getting started

Installing and removing the paper tray

1Open the paper tray door on the printer dock.

2 Slide the paper tray cover back until it "clicks" into place, about 1.25 in. (3 cm).

3 Slide the paper tray in the printer tray slot until the tray locks into place.

IMPORTANT: To ensure the paper tray fits squarely on the printer dock, make sure to keep the paper tray cover all the way open while installing.

Pull the paper tray out to remove it.

Close the paper tray cover and paper tray door to keep out dust and debris.

■When the paper tray is empty, the Paper light glows steady amber.

After refilling and installing the paper tray, press the Print button to clear the paper error and resume printing.

www.kodak.com/go/support

Image 13

Contents User’s Guide Kodak EasyShare Printer dock seriesEastman Kodak Company Rochester, New York Paper tray door Refresh button Front/top/side viewLeft/Right control Paper tray Paper light Print button/lightCooling vents Back/top/side viewTable of contents Table of contents Finding a location for your printer dock Getting startedRemove any packing material covering the connector Installing the custom camera insertYour camera Press the front of the insert down and snap into placeConnect the AC power cord into a power outlet Connecting the powerHandling and storing the color cartridge Remove the camera from the printer dockClose the cartridge door Installing and removing the color cartridgeHandling and storing the paper Loading the paper Remove the paper tray from the printer dock if installed seePull the paper tray out to remove it Installing and removing the paper trayContents subject to change Choosing the right camera battery for your EasyShare cameraExtending battery life Docking and charging your digital camera Seat the connectorPlace the camera on the printer dock. Push down to Green lights Discharging progresses Discharging battery pack lights turn off asGreen lights Progresses Tagging pictures for printing Setting the picture qualitySee your camera user’s guide for more information Press the Share button Press to locate a picturePrinting from your digital camera Printing without a computerPrinting from a Kodak card reader Press to begin printing, or press to cancelDock Printing tagged pictures Plug the USB connector from the PictBridgePrinting from a PictBridge compatible device Message disappears after 10 seconds of inactivityChanging the printed picture size Continue changing other settings or begin printingEffect of picture size on number of copies Press to begin printing Printing different pictures on the same sheetPress to select the number of copies, then press Printing duplicate pictures on the same sheetRemoving the perforated tabs from the paper Canceling printingPress and hold for 2 seconds Fold the tabs up, then down Remove each tab and discardInstalling the software Installing softwareMinimum system requirements Windows OS-based computersAdd the printer for Mac OS Follow the on-screen instructions to install the softwareWindows OS-based computer Uninstalling the softwareConnecting to a computer Using the printer dock with a computerTransferring pictures from your digital camera Transferring pictures from a Kodak card reader USB connector located on the side of the printerIf a camera is docked, remove it Printing with Kodak EasyShare software Printing from a computerSee the EasyShare software Help for details Printing tagged pictures from your computer Printing using other applicationsFrom the Start menu, select Settings, then select Printers Choosing a color modeCanceling printing General care Care and maintenanceUnplug the AC power cord from the power outlet Cleaning the paper feed rollerLightly moisten a lint-free cloth with water Traveling with your printer dock Printing problems TroubleshootingTry the following Reload the paper tray. Do not exceed the fill lineRe-install the paper tray, then press to resume printing Reconnect the powerPrinter is JammedBlink Check the paper slot on the back of the printer dock Paper stops Check the paper Feeding, Remove the paper trayTo resume printing Or by the removable tabsIf necessary Operating in a high-temperature environmentFor details Picture. See your camera user’s guide for detailsManufacturers’ card readers are not supported Print head from overheating Scrapping of paper as a result of jams or other errors Disconnect then reconnect the power and try againUnable to Remove colorWhen you try to Transfer/communication problemsTry one or more of the following Other manufacturers’ card readers are not supportedPrinter dock status lights Paper light Light status Cause Action/solution Battery charging lights Light status Cause Action/solution Print button/light Light status Cause Action/solution Picture Size lights Light status Cause Action/solution Transfer button/light Light status Cause Action/solution Helpful links Getting helpPrinter DockTelephone customer support Exact error message you receivedPrinter dock specifications Printer dock specificationsAppendix Using this product Important safety instructionsBattery safety and handling Appendix Limited Warranty WarrantyLimited warranty coverage Limitations Your rights Regulatory informationOutside the United States and Canada FCC compliance and advisoryVcci Class B ITE Canadian DOC statementEnglish translation Types, 8 button BatteryCamera Color, automatic correction, 28 computerCooling vents Power DC-in, iiDocking and charging the camera, 10 door Kodak EasyShare software helpPicture size, i, 45 print, i, 44, 46 status, 41 transfer Layout. See picture size left/right control, i lightsTips Multi-up. See picture size Loading Removing perforated tabs, 19 slotQuality setting on camera PowerNi-MH rechargeable battery pack Print button/light, i, 44 print order BypassingConnector to computer, ii Uninstalling softwareVcci compliance, 55 vents, cooling Warranty, 52 Windows OS

Related manuals

Manual 30 pages 36.44 Kb

Series 3 specifications

The Kodak Series 3 represents a significant development in the realm of photography, blending advanced features with user-friendly technology to cater to both amateur and professional photographers. Launched as part of Kodak's commitment to innovation, the Series 3 showcases a plethora of advancements that enhance image quality and overall user experience.

One of the standout features of the Kodak Series 3 is its advanced image sensing technology. Equipped with a high-resolution CCD sensor, the camera captures images with impressive clarity and detail, making it suitable for a variety of photography styles. The sensor is complemented by a sophisticated image processing engine, which reduces noise and enhances color accuracy, resulting in photos that are vibrant and true to life.

Another key characteristic of the Series 3 is its intuitive user interface. The camera boasts a sleek design with well-placed controls that allow for easy navigation and operation. Photographers can quickly adjust settings such as exposure, ISO, and white balance without interrupting their shooting flow. Additionally, the LCD display provides real-time feedback and instant access to image previews, ensuring that users can review and adjust their work on the spot.

The Kodak Series 3 also features advanced autofocus capabilities, enabling swift and accurate focus on subjects even in challenging lighting conditions. This feature is particularly beneficial for photographers who work in dynamic environments or capture fast-moving subjects. The camera’s continuous shooting mode allows users to take multiple shots in quick succession, making it an excellent choice for action photography.

In addition to its photographic capabilities, the Series 3 integrates seamless connectivity features, allowing for effortless sharing and uploading of images. With built-in Wi-Fi and Bluetooth, users can quickly transfer photos to their smart devices or control the camera remotely via a dedicated app. This technological integration caters to the modern photographer's need for convenience and connectivity in a digital age.

Durability is also a defining characteristic of the Kodak Series 3. Constructed with robust materials, the camera is designed to withstand the rigors of outdoor photography, making it a reliable companion for adventure enthusiasts. Weather-sealed components help protect against moisture and dust, further enhancing its longevity.

In summary, the Kodak Series 3 stands out with its advanced imaging technology, user-friendly design, and durable build. These features make it an attractive option for photographers of all skill levels, solidifying its place in Kodak's legacy as a leader in the photography industry. With the Series 3, Kodak continues to innovate and inspire the art of photography.