Kodak Series 3 Important safety instructions, Using this product, Battery safety and handling

Page 56

Appendix

Important safety instructions

Using this product

■Read and follow these instructions before using Kodak products. Always follow basic safety procedures.

■The use of an accessory attachment that is not recommended by Kodak, such as an AC adapter, may cause fire, electric shock, or injury.

CAUTION:

Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. Kodak AC adapters and battery chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards.

Battery safety and handling

CAUTION:

When removing batteries, allow them to cool first; batteries may be hot.

■Read and follow all warnings and instructions supplied by the battery manufacturer.

■Use only batteries that are approved for this product.

■Keep batteries out of the reach of children.

■Do not allow batteries to touch metal objects, including coins. Otherwise, a battery may short circuit, discharge energy, become hot, or leak.

■Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or extreme temperature.

50

www.kodak.com/go/support

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Kodak EasyShare Printer dock series User’s GuideEastman Kodak Company Rochester, New York Front/top/side view Paper tray door Refresh buttonLeft/Right control Paper tray Paper light Print button/lightBack/top/side view Cooling ventsTable of contents Table of contents Getting started Finding a location for your printer dockInstalling the custom camera insert Remove any packing material covering the connectorYour camera Press the front of the insert down and snap into placeConnecting the power Connect the AC power cord into a power outletHandling and storing the color cartridge Remove the camera from the printer dockInstalling and removing the color cartridge Close the cartridge doorHandling and storing the paper Remove the paper tray from the printer dock if installed see Loading the paperInstalling and removing the paper tray Pull the paper tray out to remove itChoosing the right camera battery for your EasyShare camera Contents subject to changeExtending battery life Place the camera on the printer dock. Push down to Seat the connectorDocking and charging your digital camera Green lights Progresses Discharging battery pack lights turn off asGreen lights Discharging progresses Setting the picture quality Tagging pictures for printingSee your camera user’s guide for more information Press the Share button Press to locate a picturePrinting without a computer Printing from your digital cameraDock Press to begin printing, or press to cancelPrinting from a Kodak card reader Plug the USB connector from the PictBridge Printing tagged picturesPrinting from a PictBridge compatible device Message disappears after 10 seconds of inactivityEffect of picture size on number of copies Continue changing other settings or begin printingChanging the printed picture size Printing different pictures on the same sheet Press to begin printingPrinting duplicate pictures on the same sheet Press to select the number of copies, then pressCanceling printing Removing the perforated tabs from the paperPress and hold for 2 seconds Fold the tabs up, then down Remove each tab and discardInstalling software Installing the softwareMinimum system requirements Windows OS-based computersFollow the on-screen instructions to install the software Add the printer for Mac OSUninstalling the software Windows OS-based computerUsing the printer dock with a computer Connecting to a computerTransferring pictures from your digital camera If a camera is docked, remove it USB connector located on the side of the printerTransferring pictures from a Kodak card reader See the EasyShare software Help for details Printing from a computerPrinting with Kodak EasyShare software Printing using other applications Printing tagged pictures from your computerChoosing a color mode From the Start menu, select Settings, then select PrintersCanceling printing Care and maintenance General careLightly moisten a lint-free cloth with water Cleaning the paper feed rollerUnplug the AC power cord from the power outlet Traveling with your printer dock Troubleshooting Printing problemsTry the following Reload the paper tray. Do not exceed the fill lineReconnect the power Re-install the paper tray, then press to resume printingPrinter is JammedPaper stops Check the paper Feeding, Remove the paper tray Blink Check the paper slot on the back of the printer dockTo resume printing Or by the removable tabsOperating in a high-temperature environment If necessaryFor details Picture. See your camera user’s guide for detailsManufacturers’ card readers are not supported Print head from overheating Disconnect then reconnect the power and try again Scrapping of paper as a result of jams or other errorsUnable to Remove colorTransfer/communication problems When you try toTry one or more of the following Other manufacturers’ card readers are not supportedPrinter dock status lights Paper light Light status Cause Action/solution Battery charging lights Light status Cause Action/solution Print button/light Light status Cause Action/solution Picture Size lights Light status Cause Action/solution Transfer button/light Light status Cause Action/solution Getting help Helpful linksPrinter DockExact error message you received Telephone customer supportAppendix Printer dock specificationsPrinter dock specifications Battery safety and handling Important safety instructionsUsing this product Appendix Limited warranty coverage WarrantyLimited Warranty Limitations Regulatory information Your rightsOutside the United States and Canada FCC compliance and advisoryEnglish translation Canadian DOC statementVcci Class B ITE Battery Types, 8 buttonCamera Color, automatic correction, 28 computerPower DC-in, ii Cooling ventsDocking and charging the camera, 10 door Kodak EasyShare software helpLayout. See picture size left/right control, i lights Picture size, i, 45 print, i, 44, 46 status, 41 transferTips Multi-up. See picture size Loading Removing perforated tabs, 19 slotPower Quality setting on cameraNi-MH rechargeable battery pack Print button/light, i, 44 print order BypassingVcci compliance, 55 vents, cooling Warranty, 52 Windows OS Uninstalling softwareConnector to computer, ii
Related manuals
Manual 30 pages 36.44 Kb

Series 3 specifications

The Kodak Series 3 represents a significant development in the realm of photography, blending advanced features with user-friendly technology to cater to both amateur and professional photographers. Launched as part of Kodak's commitment to innovation, the Series 3 showcases a plethora of advancements that enhance image quality and overall user experience.

One of the standout features of the Kodak Series 3 is its advanced image sensing technology. Equipped with a high-resolution CCD sensor, the camera captures images with impressive clarity and detail, making it suitable for a variety of photography styles. The sensor is complemented by a sophisticated image processing engine, which reduces noise and enhances color accuracy, resulting in photos that are vibrant and true to life.

Another key characteristic of the Series 3 is its intuitive user interface. The camera boasts a sleek design with well-placed controls that allow for easy navigation and operation. Photographers can quickly adjust settings such as exposure, ISO, and white balance without interrupting their shooting flow. Additionally, the LCD display provides real-time feedback and instant access to image previews, ensuring that users can review and adjust their work on the spot.

The Kodak Series 3 also features advanced autofocus capabilities, enabling swift and accurate focus on subjects even in challenging lighting conditions. This feature is particularly beneficial for photographers who work in dynamic environments or capture fast-moving subjects. The camera’s continuous shooting mode allows users to take multiple shots in quick succession, making it an excellent choice for action photography.

In addition to its photographic capabilities, the Series 3 integrates seamless connectivity features, allowing for effortless sharing and uploading of images. With built-in Wi-Fi and Bluetooth, users can quickly transfer photos to their smart devices or control the camera remotely via a dedicated app. This technological integration caters to the modern photographer's need for convenience and connectivity in a digital age.

Durability is also a defining characteristic of the Kodak Series 3. Constructed with robust materials, the camera is designed to withstand the rigors of outdoor photography, making it a reliable companion for adventure enthusiasts. Weather-sealed components help protect against moisture and dust, further enhancing its longevity.

In summary, the Kodak Series 3 stands out with its advanced imaging technology, user-friendly design, and durable build. These features make it an attractive option for photographers of all skill levels, solidifying its place in Kodak's legacy as a leader in the photography industry. With the Series 3, Kodak continues to innovate and inspire the art of photography.
Top Page Image Contents