Kodak Series 3 manual Print button/light Light status Cause Action/solution

Page 50
www.kodak.com/go/support

Troubleshooting

Print button/light

Light status

Cause

Action/solution

 

 

 

 

 

Light glows steady

The printer dock is ready for

None required.

 

green

printing.

 

 

 

 

 

 

Light blinks green

The printer dock is printing.

 

 

 

 

 

 

Light is off

There are no pictures in the

None required.

 

 

camera or on the card.

To enable Print:

 

 

The camera is not docked or a

1 Take pictures.

 

 

compatible Kodak card reader is

2 Dock the camera, or connect a

 

not connected.

compatible Kodak card reader

 

 

 

 

(page 14). If using a card

 

 

 

reader, make sure a memory

 

 

 

card is inserted.

 

 

 

 

 

The camera is not properly seated

Reseat the camera on the printer

 

on the connector.

dock (page 10).

 

 

 

 

 

 

The camera or card reader is

None required.

 

 

transferring pictures to the

When transfer is complete, press

 

computer, or has established an

the blinking Transfer button,

.

 

active connection to the

 

 

 

computer.

 

 

 

 

 

 

 

A PictBridge compatible device is

None required.

 

 

connected.

The Print button is disabled; print

 

 

command is controlled from the

 

 

 

PictBridge compatible device. To

 

 

 

print from another source, unplug

 

 

the PictBridge compatible device.

 

 

 

 

44

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Kodak EasyShare Printer dock series User’s GuideEastman Kodak Company Rochester, New York Left/Right control Front/top/side viewPaper tray door Refresh button Paper tray Paper light Print button/lightBack/top/side view Cooling ventsTable of contents Table of contents Getting started Finding a location for your printer dockYour camera Installing the custom camera insertRemove any packing material covering the connector Press the front of the insert down and snap into placeHandling and storing the color cartridge Connecting the powerConnect the AC power cord into a power outlet Remove the camera from the printer dockInstalling and removing the color cartridge Close the cartridge doorHandling and storing the paper Remove the paper tray from the printer dock if installed see Loading the paperInstalling and removing the paper tray Pull the paper tray out to remove itChoosing the right camera battery for your EasyShare camera Contents subject to changeExtending battery life Place the camera on the printer dock. Push down to Seat the connectorDocking and charging your digital camera Green lights Progresses Discharging battery pack lights turn off asGreen lights Discharging progresses See your camera user’s guide for more information Setting the picture qualityTagging pictures for printing Press the Share button Press to locate a picturePrinting without a computer Printing from your digital cameraDock Press to begin printing, or press to cancelPrinting from a Kodak card reader Printing from a PictBridge compatible device Plug the USB connector from the PictBridgePrinting tagged pictures Message disappears after 10 seconds of inactivityEffect of picture size on number of copies Continue changing other settings or begin printingChanging the printed picture size Printing different pictures on the same sheet Press to begin printingPrinting duplicate pictures on the same sheet Press to select the number of copies, then pressPress and hold for 2 seconds Canceling printingRemoving the perforated tabs from the paper Fold the tabs up, then down Remove each tab and discardMinimum system requirements Installing softwareInstalling the software Windows OS-based computersFollow the on-screen instructions to install the software Add the printer for Mac OSUninstalling the software Windows OS-based computerUsing the printer dock with a computer Connecting to a computerTransferring pictures from your digital camera If a camera is docked, remove it USB connector located on the side of the printerTransferring pictures from a Kodak card reader See the EasyShare software Help for details Printing from a computerPrinting with Kodak EasyShare software Printing using other applications Printing tagged pictures from your computerChoosing a color mode From the Start menu, select Settings, then select PrintersCanceling printing Care and maintenance General careLightly moisten a lint-free cloth with water Cleaning the paper feed rollerUnplug the AC power cord from the power outlet Traveling with your printer dock Try the following TroubleshootingPrinting problems Reload the paper tray. Do not exceed the fill linePrinter is Reconnect the powerRe-install the paper tray, then press to resume printing JammedTo resume printing Paper stops Check the paper Feeding, Remove the paper trayBlink Check the paper slot on the back of the printer dock Or by the removable tabsFor details Operating in a high-temperature environmentIf necessary Picture. See your camera user’s guide for detailsManufacturers’ card readers are not supported Print head from overheating Unable to Disconnect then reconnect the power and try againScrapping of paper as a result of jams or other errors Remove colorTry one or more of the following Transfer/communication problemsWhen you try to Other manufacturers’ card readers are not supportedPrinter dock status lights Paper light Light status Cause Action/solution Battery charging lights Light status Cause Action/solution Print button/light Light status Cause Action/solution Picture Size lights Light status Cause Action/solution Transfer button/light Light status Cause Action/solution Printer Getting helpHelpful links DockExact error message you received Telephone customer supportAppendix Printer dock specificationsPrinter dock specifications Battery safety and handling Important safety instructionsUsing this product Appendix Limited warranty coverage WarrantyLimited Warranty Limitations Outside the United States and Canada Regulatory informationYour rights FCC compliance and advisoryEnglish translation Canadian DOC statementVcci Class B ITE Camera BatteryTypes, 8 button Color, automatic correction, 28 computerDocking and charging the camera, 10 door Power DC-in, iiCooling vents Kodak EasyShare software helpTips Multi-up. See picture size Layout. See picture size left/right control, i lightsPicture size, i, 45 print, i, 44, 46 status, 41 transfer Loading Removing perforated tabs, 19 slotNi-MH rechargeable battery pack PowerQuality setting on camera Print button/light, i, 44 print order BypassingVcci compliance, 55 vents, cooling Warranty, 52 Windows OS Uninstalling softwareConnector to computer, ii
Related manuals
Manual 30 pages 36.44 Kb

Series 3 specifications

The Kodak Series 3 represents a significant development in the realm of photography, blending advanced features with user-friendly technology to cater to both amateur and professional photographers. Launched as part of Kodak's commitment to innovation, the Series 3 showcases a plethora of advancements that enhance image quality and overall user experience.

One of the standout features of the Kodak Series 3 is its advanced image sensing technology. Equipped with a high-resolution CCD sensor, the camera captures images with impressive clarity and detail, making it suitable for a variety of photography styles. The sensor is complemented by a sophisticated image processing engine, which reduces noise and enhances color accuracy, resulting in photos that are vibrant and true to life.

Another key characteristic of the Series 3 is its intuitive user interface. The camera boasts a sleek design with well-placed controls that allow for easy navigation and operation. Photographers can quickly adjust settings such as exposure, ISO, and white balance without interrupting their shooting flow. Additionally, the LCD display provides real-time feedback and instant access to image previews, ensuring that users can review and adjust their work on the spot.

The Kodak Series 3 also features advanced autofocus capabilities, enabling swift and accurate focus on subjects even in challenging lighting conditions. This feature is particularly beneficial for photographers who work in dynamic environments or capture fast-moving subjects. The camera’s continuous shooting mode allows users to take multiple shots in quick succession, making it an excellent choice for action photography.

In addition to its photographic capabilities, the Series 3 integrates seamless connectivity features, allowing for effortless sharing and uploading of images. With built-in Wi-Fi and Bluetooth, users can quickly transfer photos to their smart devices or control the camera remotely via a dedicated app. This technological integration caters to the modern photographer's need for convenience and connectivity in a digital age.

Durability is also a defining characteristic of the Kodak Series 3. Constructed with robust materials, the camera is designed to withstand the rigors of outdoor photography, making it a reliable companion for adventure enthusiasts. Weather-sealed components help protect against moisture and dust, further enhancing its longevity.

In summary, the Kodak Series 3 stands out with its advanced imaging technology, user-friendly design, and durable build. These features make it an attractive option for photographers of all skill levels, solidifying its place in Kodak's legacy as a leader in the photography industry. With the Series 3, Kodak continues to innovate and inspire the art of photography.
Top Page Image Contents