Kodak Series 3 manual Picture Size lights Light status Cause Action/solution

Page 51

 

 

Troubleshooting

 

 

 

Picture Size lights

 

 

Light status

Cause

Action/solution

One light glows steady

The indicated picture size is

None required.

green

available and selected.

To change picture size, press

 

 

the Picture Size button

 

 

repeatedly.

 

 

 

All lights are off

There are no pictures in the camera,

To enable the picture size

 

on the card, or on the PictBridge

option:

 

compatible device.

1 Take pictures.

 

The camera is not docked, a

2 Dock the camera or

 

compatible Kodak card reader or

connect a compatible

 

PictBridge compatible device is not

Kodak card reader

 

connected, or a memory card is not

(page 14) or PictBridge

 

inserted.

compatible device

 

 

(page 13). If using a card

 

 

reader, make sure a

 

 

memory card is inserted.

 

 

 

 

The camera is not properly seated

Reseat the camera on the

 

on the connector.

printer dock (page 10).

 

 

 

 

The camera or card reader is

None required.

 

transferring pictures to the

 

 

computer, or has established an

 

 

active connection to the computer.

 

 

 

 

www.kodak.com/go/support

45

Page 50 Page 52
Image 51
Page 50 Page 52
Contents User’s Guide Kodak EasyShare Printer dock seriesEastman Kodak Company Rochester, New York Paper tray Paper light Print button/light Front/top/side viewPaper tray door Refresh button Left/Right controlCooling vents Back/top/side viewTable of contents Table of contents Finding a location for your printer dock Getting startedPress the front of the insert down and snap into place Installing the custom camera insertRemove any packing material covering the connector Your cameraRemove the camera from the printer dock Connecting the powerConnect the AC power cord into a power outlet Handling and storing the color cartridgeClose the cartridge door Installing and removing the color cartridgeHandling and storing the paper Loading the paper Remove the paper tray from the printer dock if installed seePull the paper tray out to remove it Installing and removing the paper trayContents subject to change Choosing the right camera battery for your EasyShare cameraExtending battery life Seat the connector Docking and charging your digital cameraPlace the camera on the printer dock. Push down to Discharging battery pack lights turn off as Green lights Discharging progressesGreen lights Progresses Press the Share button Press to locate a picture Setting the picture qualityTagging pictures for printing See your camera user’s guide for more informationPrinting from your digital camera Printing without a computerPress to begin printing, or press to cancel Printing from a Kodak card readerDock Message disappears after 10 seconds of inactivity Plug the USB connector from the PictBridgePrinting tagged pictures Printing from a PictBridge compatible deviceContinue changing other settings or begin printing Changing the printed picture sizeEffect of picture size on number of copies Press to begin printing Printing different pictures on the same sheetPress to select the number of copies, then press Printing duplicate pictures on the same sheetFold the tabs up, then down Remove each tab and discard Canceling printingRemoving the perforated tabs from the paper Press and hold for 2 secondsWindows OS-based computers Installing softwareInstalling the software Minimum system requirementsAdd the printer for Mac OS Follow the on-screen instructions to install the softwareWindows OS-based computer Uninstalling the softwareConnecting to a computer Using the printer dock with a computerTransferring pictures from your digital camera USB connector located on the side of the printer Transferring pictures from a Kodak card readerIf a camera is docked, remove it Printing from a computer Printing with Kodak EasyShare softwareSee the EasyShare software Help for details Printing tagged pictures from your computer Printing using other applicationsFrom the Start menu, select Settings, then select Printers Choosing a color modeCanceling printing General care Care and maintenanceCleaning the paper feed roller Unplug the AC power cord from the power outletLightly moisten a lint-free cloth with water Traveling with your printer dock Reload the paper tray. Do not exceed the fill line TroubleshootingPrinting problems Try the followingJammed Reconnect the powerRe-install the paper tray, then press to resume printing Printer isOr by the removable tabs Paper stops Check the paper Feeding, Remove the paper trayBlink Check the paper slot on the back of the printer dock To resume printingPicture. See your camera user’s guide for details Operating in a high-temperature environmentIf necessary For detailsManufacturers’ card readers are not supported Print head from overheating Remove color Disconnect then reconnect the power and try againScrapping of paper as a result of jams or other errors Unable toOther manufacturers’ card readers are not supported Transfer/communication problemsWhen you try to Try one or more of the followingPrinter dock status lights Paper light Light status Cause Action/solution Battery charging lights Light status Cause Action/solution Print button/light Light status Cause Action/solution Picture Size lights Light status Cause Action/solution Transfer button/light Light status Cause Action/solution Dock Getting helpHelpful links PrinterTelephone customer support Exact error message you receivedPrinter dock specifications Printer dock specificationsAppendix Important safety instructions Using this productBattery safety and handling Appendix Warranty Limited WarrantyLimited warranty coverage Limitations FCC compliance and advisory Regulatory informationYour rights Outside the United States and CanadaCanadian DOC statement Vcci Class B ITEEnglish translation Color, automatic correction, 28 computer BatteryTypes, 8 button CameraKodak EasyShare software help Power DC-in, iiCooling vents Docking and charging the camera, 10 doorLoading Removing perforated tabs, 19 slot Layout. See picture size left/right control, i lightsPicture size, i, 45 print, i, 44, 46 status, 41 transfer Tips Multi-up. See picture sizePrint button/light, i, 44 print order Bypassing PowerQuality setting on camera Ni-MH rechargeable battery packUninstalling software Connector to computer, iiVcci compliance, 55 vents, cooling Warranty, 52 Windows OS
Related manuals
Manual 30 pages 36.44 Kb

Series 3 specifications

The Kodak Series 3 represents a significant development in the realm of photography, blending advanced features with user-friendly technology to cater to both amateur and professional photographers. Launched as part of Kodak's commitment to innovation, the Series 3 showcases a plethora of advancements that enhance image quality and overall user experience.

One of the standout features of the Kodak Series 3 is its advanced image sensing technology. Equipped with a high-resolution CCD sensor, the camera captures images with impressive clarity and detail, making it suitable for a variety of photography styles. The sensor is complemented by a sophisticated image processing engine, which reduces noise and enhances color accuracy, resulting in photos that are vibrant and true to life.

Another key characteristic of the Series 3 is its intuitive user interface. The camera boasts a sleek design with well-placed controls that allow for easy navigation and operation. Photographers can quickly adjust settings such as exposure, ISO, and white balance without interrupting their shooting flow. Additionally, the LCD display provides real-time feedback and instant access to image previews, ensuring that users can review and adjust their work on the spot.

The Kodak Series 3 also features advanced autofocus capabilities, enabling swift and accurate focus on subjects even in challenging lighting conditions. This feature is particularly beneficial for photographers who work in dynamic environments or capture fast-moving subjects. The camera’s continuous shooting mode allows users to take multiple shots in quick succession, making it an excellent choice for action photography.

In addition to its photographic capabilities, the Series 3 integrates seamless connectivity features, allowing for effortless sharing and uploading of images. With built-in Wi-Fi and Bluetooth, users can quickly transfer photos to their smart devices or control the camera remotely via a dedicated app. This technological integration caters to the modern photographer's need for convenience and connectivity in a digital age.

Durability is also a defining characteristic of the Kodak Series 3. Constructed with robust materials, the camera is designed to withstand the rigors of outdoor photography, making it a reliable companion for adventure enthusiasts. Weather-sealed components help protect against moisture and dust, further enhancing its longevity.

In summary, the Kodak Series 3 stands out with its advanced imaging technology, user-friendly design, and durable build. These features make it an attractive option for photographers of all skill levels, solidifying its place in Kodak's legacy as a leader in the photography industry. With the Series 3, Kodak continues to innovate and inspire the art of photography.
Top Page Image Contents