Kodak Series 3 manual Installing and removing the color cartridge, Close the cartridge door

Page 10

Getting started

Installing and removing the color cartridge

1Open the cartridge door on the side of the printer dock.

2Check to make sure there is no slack in the color cartridge ribbon.

To remove slack, push in on the cartridge spool, then rotate the spool clockwise.

IMPORTANT: Be careful not to rotate the spool more than necessary. Doing so could reduce the number of prints you are able to make.

3 Slide the color cartridge in, label side up, with the arrow pointing toward the printer dock. Push the cartridge until it "clicks" into place.

4 Close the cartridge door.

IMPORTANT: The color cartridge may lock in place if there is a paper error. Do not attempt to remove the cartridge without first clearing the paper error. Make sure the Paper light is off before attempting to remove the cartridge (see Paper light under Printer dock status lights, page 41).

To remove the color cartridge, open the color cartridge door, then push up on the green lever and slide the cartridge out.

4

www.kodak.com/go/support

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Kodak EasyShare Printer dock series User’s GuideEastman Kodak Company Rochester, New York Left/Right control Front/top/side viewPaper tray door Refresh button Paper tray Paper light Print button/lightBack/top/side view Cooling ventsTable of contents Table of contents Getting started Finding a location for your printer dockYour camera Installing the custom camera insertRemove any packing material covering the connector Press the front of the insert down and snap into placeHandling and storing the color cartridge Connecting the powerConnect the AC power cord into a power outlet Remove the camera from the printer dockInstalling and removing the color cartridge Close the cartridge doorHandling and storing the paper Remove the paper tray from the printer dock if installed see Loading the paperInstalling and removing the paper tray Pull the paper tray out to remove itChoosing the right camera battery for your EasyShare camera Contents subject to changeExtending battery life Docking and charging your digital camera Seat the connectorPlace the camera on the printer dock. Push down to Green lights Discharging progresses Discharging battery pack lights turn off asGreen lights Progresses See your camera user’s guide for more information Setting the picture qualityTagging pictures for printing Press the Share button Press to locate a picturePrinting without a computer Printing from your digital cameraPrinting from a Kodak card reader Press to begin printing, or press to cancelDock Printing from a PictBridge compatible device Plug the USB connector from the PictBridgePrinting tagged pictures Message disappears after 10 seconds of inactivityChanging the printed picture size Continue changing other settings or begin printingEffect of picture size on number of copies Printing different pictures on the same sheet Press to begin printingPrinting duplicate pictures on the same sheet Press to select the number of copies, then pressPress and hold for 2 seconds Canceling printingRemoving the perforated tabs from the paper Fold the tabs up, then down Remove each tab and discardMinimum system requirements Installing softwareInstalling the software Windows OS-based computersFollow the on-screen instructions to install the software Add the printer for Mac OSUninstalling the software Windows OS-based computerUsing the printer dock with a computer Connecting to a computerTransferring pictures from your digital camera Transferring pictures from a Kodak card reader USB connector located on the side of the printerIf a camera is docked, remove it Printing with Kodak EasyShare software Printing from a computerSee the EasyShare software Help for details Printing using other applications Printing tagged pictures from your computerChoosing a color mode From the Start menu, select Settings, then select PrintersCanceling printing Care and maintenance General careUnplug the AC power cord from the power outlet Cleaning the paper feed rollerLightly moisten a lint-free cloth with water Traveling with your printer dock Try the following TroubleshootingPrinting problems Reload the paper tray. Do not exceed the fill linePrinter is Reconnect the powerRe-install the paper tray, then press to resume printing JammedTo resume printing Paper stops Check the paper Feeding, Remove the paper trayBlink Check the paper slot on the back of the printer dock Or by the removable tabsFor details Operating in a high-temperature environmentIf necessary Picture. See your camera user’s guide for detailsManufacturers’ card readers are not supported Print head from overheating Unable to Disconnect then reconnect the power and try againScrapping of paper as a result of jams or other errors Remove colorTry one or more of the following Transfer/communication problemsWhen you try to Other manufacturers’ card readers are not supportedPrinter dock status lights Paper light Light status Cause Action/solution Battery charging lights Light status Cause Action/solution Print button/light Light status Cause Action/solution Picture Size lights Light status Cause Action/solution Transfer button/light Light status Cause Action/solution Printer Getting helpHelpful links DockExact error message you received Telephone customer supportPrinter dock specifications Printer dock specificationsAppendix Using this product Important safety instructionsBattery safety and handling Appendix Limited Warranty WarrantyLimited warranty coverage Limitations Outside the United States and Canada Regulatory informationYour rights FCC compliance and advisoryVcci Class B ITE Canadian DOC statementEnglish translation Camera BatteryTypes, 8 button Color, automatic correction, 28 computerDocking and charging the camera, 10 door Power DC-in, iiCooling vents Kodak EasyShare software helpTips Multi-up. See picture size Layout. See picture size left/right control, i lightsPicture size, i, 45 print, i, 44, 46 status, 41 transfer Loading Removing perforated tabs, 19 slotNi-MH rechargeable battery pack PowerQuality setting on camera Print button/light, i, 44 print order BypassingConnector to computer, ii Uninstalling softwareVcci compliance, 55 vents, cooling Warranty, 52 Windows OS
Related manuals
Manual 30 pages 36.44 Kb

Series 3 specifications

The Kodak Series 3 represents a significant development in the realm of photography, blending advanced features with user-friendly technology to cater to both amateur and professional photographers. Launched as part of Kodak's commitment to innovation, the Series 3 showcases a plethora of advancements that enhance image quality and overall user experience.

One of the standout features of the Kodak Series 3 is its advanced image sensing technology. Equipped with a high-resolution CCD sensor, the camera captures images with impressive clarity and detail, making it suitable for a variety of photography styles. The sensor is complemented by a sophisticated image processing engine, which reduces noise and enhances color accuracy, resulting in photos that are vibrant and true to life.

Another key characteristic of the Series 3 is its intuitive user interface. The camera boasts a sleek design with well-placed controls that allow for easy navigation and operation. Photographers can quickly adjust settings such as exposure, ISO, and white balance without interrupting their shooting flow. Additionally, the LCD display provides real-time feedback and instant access to image previews, ensuring that users can review and adjust their work on the spot.

The Kodak Series 3 also features advanced autofocus capabilities, enabling swift and accurate focus on subjects even in challenging lighting conditions. This feature is particularly beneficial for photographers who work in dynamic environments or capture fast-moving subjects. The camera’s continuous shooting mode allows users to take multiple shots in quick succession, making it an excellent choice for action photography.

In addition to its photographic capabilities, the Series 3 integrates seamless connectivity features, allowing for effortless sharing and uploading of images. With built-in Wi-Fi and Bluetooth, users can quickly transfer photos to their smart devices or control the camera remotely via a dedicated app. This technological integration caters to the modern photographer's need for convenience and connectivity in a digital age.

Durability is also a defining characteristic of the Kodak Series 3. Constructed with robust materials, the camera is designed to withstand the rigors of outdoor photography, making it a reliable companion for adventure enthusiasts. Weather-sealed components help protect against moisture and dust, further enhancing its longevity.

In summary, the Kodak Series 3 stands out with its advanced imaging technology, user-friendly design, and durable build. These features make it an attractive option for photographers of all skill levels, solidifying its place in Kodak's legacy as a leader in the photography industry. With the Series 3, Kodak continues to innovate and inspire the art of photography.
Top Page Image Contents