Kodak 750 manual Interval Component Cleaning Agent

Page 10

NJ750 Training Guide

C. Routine Maintenance

1.Perform routine maintenance at recommended plot time hours and in accordance with prescribed documentation.

NOTE: The NovaJet printer must be cleaned and serviced routinely or print output anomalies or printer failures may occur during normal operations. It is strongly suggested to take 15 minutes once a week (i.e. every Monday morning) and

perform printer cleaning rather than attempt to remember each cleaning cycle as listed below.

INTERVAL	COMPONENT	CLEANING AGENT
25-50 Hours	Platen/External Surfaces	NovaKlean solution on Lint-Free Towel

Can cause paper sensing errors; resulting in ‘no printing’ symptoms.

INTERVAL	COMPONENT	CLEANING AGENT
10-20 Hours	Service Station	NovaKlean or Distilled Water

10

Image 10

Contents Training Guide ‘Plug and Play Cartridge’ characteristics Installing ink into reservoirsActivate the color test pattern for ink starvation problems Activate the Prime pattern NJ750 Training Guide Cartridge Jet Manual Bypass Feature Utility MenuSlow Deadband Paper Axis TestColor Deadband Deadband Check Color CalibrationControlling Image Skew not media skew as this is mechanical Acceptable Image Skew Interval Component Cleaning Agent Hours Trailing Cable NovaKlean on lint-free Towel Hours Pinch/Lower Roller NovaKlean on lint-free Towel As Required Paper Sensor Isopropyl Alcohol on cotton swab Preventive Maintenance Cartridge Checklist for warranty replacement Advanced Troubleshooting NJ750 Training Guide Jet Cartridge NJ750 Training Guide NJ750 Training Guide NJ750 Training Guide NJ750 Training Guide Sensor Status Print Server Networking SEH Intercon print server Version 1.8.23 for Win 2000, Win XP, Win PC Protocol Setup Print Server Protocol Setup NJ750 Training Guide Windows Printer Port Setup NJ750 Training Guide NJ750 Training Guide Raster Image Processor RIP TCP/IP Assignment

Related manuals

Manual 42 pages 460 b