Kodak 750 manual Raster Image Processor RIP TCP/IP Assignment

Page 32

NJ750 Training Guide

4. RASTER IMAGE PROCESSOR (RIP) TCP/IP ASSIGNMENT

1.The last step of the networking setup is to assign an IP address in the RIP software (this TCP/IP address is the same address assigned to the SEH Intercon print server). The location of the ‘device’ or ‘TCP/IP setup’ is normally located under the RIP software ‘setup’ drop-down menu or under the ‘Printer Configuration’ folder, depending on the RIP used.

32

Image 32

Contents Training Guide ‘Plug and Play Cartridge’ characteristics Installing ink into reservoirsActivate the color test pattern for ink starvation problems Activate the Prime pattern NJ750 Training Guide Cartridge Jet Manual Bypass Feature Utility MenuColor Deadband Paper Axis TestSlow Deadband Controlling Image Skew not media skew as this is mechanical Color CalibrationDeadband Check Acceptable Image Skew Interval Component Cleaning Agent Hours Trailing Cable NovaKlean on lint-free Towel Hours Pinch/Lower Roller NovaKlean on lint-free Towel As Required Paper Sensor Isopropyl Alcohol on cotton swab Preventive Maintenance Cartridge Checklist for warranty replacement Advanced Troubleshooting NJ750 Training Guide Jet Cartridge NJ750 Training Guide NJ750 Training Guide NJ750 Training Guide NJ750 Training Guide Sensor Status Print Server Networking SEH Intercon print server Version 1.8.23 for Win 2000, Win XP, Win PC Protocol Setup Print Server Protocol Setup NJ750 Training Guide Windows Printer Port Setup NJ750 Training Guide NJ750 Training Guide Raster Image Processor RIP TCP/IP Assignment

Related manuals

Manual 42 pages 460 b