Kodak 750 manual Version 1.8.23 for Win 2000, Win XP, Win

Page 25

NJ750 Training Guide

Configuration for Windows 2000/XP

Printer Networking is a basically a 3-step Process:

1.Assign TCP/IP address of host computer/server

2.Assign TCP/IP address to print server (may also need to install windows printer port during this process)

3.Assign TCP/IP address to RIP (same as print server)

For the most recent software version (i.e. InterCon NetTool) go to the following URL:

http://www.seh.de/

NOTE: The most common download, for PC users, from SUPPORT - FIRMWARE/SOFTWARE (select IC105 FastPocket-TX) is:

Version 1.8.23 for Win 2000, Win XP, Win 9x

Administration tool for InterCon print servers.

25

Image 25

Contents Training Guide Installing ink into reservoirs ‘Plug and Play Cartridge’ characteristicsActivate the color test pattern for ink starvation problems Activate the Prime pattern NJ750 Training Guide Utility Menu Cartridge Jet Manual Bypass FeatureSlow Deadband Paper Axis TestColor Deadband Deadband Check Color CalibrationControlling Image Skew not media skew as this is mechanical Acceptable Image Skew Interval Component Cleaning Agent Hours Trailing Cable NovaKlean on lint-free Towel Hours Pinch/Lower Roller NovaKlean on lint-free Towel As Required Paper Sensor Isopropyl Alcohol on cotton swab Preventive Maintenance Cartridge Checklist for warranty replacement Advanced Troubleshooting NJ750 Training Guide Jet Cartridge NJ750 Training Guide NJ750 Training Guide NJ750 Training Guide NJ750 Training Guide Sensor Status Print Server Networking SEH Intercon print server Version 1.8.23 for Win 2000, Win XP, Win PC Protocol Setup Print Server Protocol Setup NJ750 Training Guide Windows Printer Port Setup NJ750 Training Guide NJ750 Training Guide Raster Image Processor RIP TCP/IP Assignment

Related manuals

Manual 42 pages 460 b