NJ750 Training Guide
A. Ink Installation
1. ‘Plug and Play Cartridge’ characteristics
Installed needle assembly
Do not break connection when installing
new cartridge
25ml inside - preprimed
2.Installing ink into reservoirs
It is suggested to fill reservoirs over a table to prevent spills on printer; fill to a maximum of 400 ml (50 ml minimum).
3.Attach septum fitting to valve body. Prime line (and cartridge if necessary).
NOTE: When the valve body is raised to the up position ink flow is cut off, when the valve body (latch) is closed then the ink line is open.
2