Kodak 750 manual Print Server Protocol Setup

Page 27

NJ750 Training Guide

Alternate DNS Server- 192.168.254.190

Leave the Gateway blank. See Figure Below.

NOTE: To configure the SEH print server you will have to load the InterCon NetTool. Insert the InterCon CD into your CD drive or obtain from:

http://www.seh.de/

2. PRINT SERVER PROTOCOL SETUP

Run the CD.EXE from the Autorun folder. Once started press the top button(British Flag). Press the InterCon-NetTool button to install. Follow the prompts and finish the installation.

1.Once loaded activate the InterCon-NetTool. The SEH will Auto-Assign itself an IP address, using DHCP, within the IP range of your PC. To change the IP address and Subnet Mask, double click on the IP address or select Properties from the Edit pull down menu. See figure below.

27

Image 27

Contents Training Guide Installing ink into reservoirs ‘Plug and Play Cartridge’ characteristicsActivate the color test pattern for ink starvation problems Activate the Prime pattern NJ750 Training Guide Utility Menu Cartridge Jet Manual Bypass FeaturePaper Axis Test Slow DeadbandColor Deadband Color Calibration Deadband CheckControlling Image Skew not media skew as this is mechanical Acceptable Image Skew Interval Component Cleaning Agent Hours Trailing Cable NovaKlean on lint-free Towel Hours Pinch/Lower Roller NovaKlean on lint-free Towel As Required Paper Sensor Isopropyl Alcohol on cotton swab Preventive Maintenance Cartridge Checklist for warranty replacement Advanced Troubleshooting NJ750 Training Guide Jet Cartridge NJ750 Training Guide NJ750 Training Guide NJ750 Training Guide NJ750 Training Guide Sensor Status Print Server Networking SEH Intercon print server Version 1.8.23 for Win 2000, Win XP, Win PC Protocol Setup Print Server Protocol Setup NJ750 Training Guide Windows Printer Port Setup NJ750 Training Guide NJ750 Training Guide Raster Image Processor RIP TCP/IP Assignment

Related manuals

Manual 42 pages 460 b