Kodak 750 manual PC Protocol Setup

Page 26

NJ750 Training Guide

NOTE: Before you can configure a Windows print queue, you must first configure an IP address on both your PC and the SEH print server.

1. PC PROTOCOL SETUP

1.If you have not already done so, install the TCP/IP protocol on your PC. This is done by first RIGHT-CLICKING on the My Network Places icon on your desktop. Select Properties from the list. The Network dialog box appears.

2.Double click on the Local Area Connection icon. When the Local Area Connection dialog box opens, double click on the TCP/IP protocol to activate the TCP/IP properties. See figure below.

3.Once the TCP/IP properties dialog box is open enter the information as follows: IP Address- 192.168.254.201

SUBNET Mask- 255.255.255.0 DNS Server- 192.168.254.195

26

Image 26

Contents Training Guide ‘Plug and Play Cartridge’ characteristics Installing ink into reservoirsActivate the color test pattern for ink starvation problems Activate the Prime pattern NJ750 Training Guide Cartridge Jet Manual Bypass Feature Utility MenuColor Deadband Paper Axis TestSlow Deadband Controlling Image Skew not media skew as this is mechanical Color CalibrationDeadband Check Acceptable Image Skew Interval Component Cleaning Agent Hours Trailing Cable NovaKlean on lint-free Towel Hours Pinch/Lower Roller NovaKlean on lint-free Towel As Required Paper Sensor Isopropyl Alcohol on cotton swab Preventive Maintenance Cartridge Checklist for warranty replacement Advanced Troubleshooting NJ750 Training Guide Jet Cartridge NJ750 Training Guide NJ750 Training Guide NJ750 Training Guide NJ750 Training Guide Sensor Status Print Server Networking SEH Intercon print server Version 1.8.23 for Win 2000, Win XP, Win PC Protocol Setup Print Server Protocol Setup NJ750 Training Guide Windows Printer Port Setup NJ750 Training Guide NJ750 Training Guide Raster Image Processor RIP TCP/IP Assignment

Related manuals

Manual 42 pages 460 b