FARGO electronic Pro-L manual Resin-Only Ribbons, Standard Resin Black K, Metallic Resin

Page 25

Pro-L Card Printer User’s Manual

Resin-Only Ribbons

Resin-only ribbons consist of a continuous roll of a single resin color. No protective overlay panel (O) is provided since resin images do not require the protection of such an overlay. The following resin-only ribbon types are available:

 

Standard Resin Black (K)

This ribbon provides high resin durability ideal

 

(provides 1,000 prints)

for most general purpose monochrome ID card

 

 

 

applications. Resin black bar codes are readable by

 

K

 

 

 

both infra-red and visible-light bar code scanners.

 

 

 

 

 

 

 

 

Colored Resin

Several colored resin ribbons are available in

 

(provides 1,000 prints)

a variety of colors for customizing or color coding

 

 

 

resin-only ID cards.

 

 

 

 

 

Premium Resin Black (K)

This ribbon provides maximum resin durability

 

(provides 1,000 prints)

ideal for applications such as access control where

 

 

 

cards are repeatedly swiped through a magnetic stripe

 

K

 

 

 

reader. Resin black bar codes are readable by both

 

 

 

 

 

 

infra-red and visible-light bar code scanners.

 

 

 

 

 

Metallic Resin

Metallic resin ribbons are available for printing

 

(provides 1,000 prints)

resin images with a metallic sheen.

 

 

 

 

 

Scratch-Off Resin

A scratch-off resin ribbon is available for printing

 

(provides 1,000 prints)

over areas of a pre-printed card in order to hide

 

 

 

specific information such as a personal identification

 

 

 

number.

Dye-Sublimation-Only Ribbons

Dye-sublimation-only ribbons are available in either monochrome or full-color versions. These ribbons consist of a series of dye-sublimation ribbon panels which alternate with a clear protective overlay (O) panel. Dye-sublimation images must have either an overlay panel or an overlaminate applied to them or they will quickly begin to wear or fade. The following dye-sublimation-only ribbon types are available:

 

Dye-Sublimation Black (BO)

This ribbon provides a dye-sublimation black

 

 

(provides 500 prints)

 

 

panel (B) along with an overlay panel (O) and

 

 

 

 

 

 

 

 

 

 

 

 

is used to print smooth, photo-quality black

 

 

 

 

B

 

O

 

 

 

and white photo ID cards. Dye-sublimation

 

 

 

 

 

 

 

 

 

 

 

 

bar codes are readable only by visible-light

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

bar code scanners.

 

 

 

 

 

 

 

 

 

 

 

 

 

Full-Color (YMCBO)

 

 

This ribbon allows you to print full-color

 

 

(provides 250 prints)

 

 

photo ID cards. Since the black panel of this

 

 

 

 

 

 

 

 

 

 

 

 

ribbon is dye-sublimation black (B), bar codes

 

Y

M

 

C

 

B

O

 

printed with this ribbon can only be read by

 

 

 

 

 

 

 

 

 

 

 

 

visible-light bar code scanners.

 

 

 

 

 

 

 

 

 

 

 

 

 

20

Section 4: Ribbons and Cards

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Page Printing History Trademark AcknowledgementsFor Users in Canada For Users in the United StatesFor Users in Taiwan Table of Contents Appendix a Magnetic Stripe Encoding Module Thank You IntroductionHOW Your Card Printer Works Dye-SublimationResin Thermal Transfer Special FeaturesSafety Precautions Sicherheitsmaßnahmen Consignes de sécurité Precauciones de seguridad Precauzioni per la Sicurezza Precauções de Segurança Pro-L Card Printer User’s Manual Pro-L Card Printer User’s Manual Pro-L Card Printer User’s Manual Pro-L Card Printer User’s Manual Choosing a Good Location Getting StartedAbout Moisture Condensation Unpacking and Inspection Applying PowerPower Input Port LCD Display Identifying the Printer FeaturesOn LED Light Ready LED Light On/Cancel ButtonPause/Resume Button Security Card SlotPro-L Card Printer User’s Manual About Ribbons Ribbons and CardsStandard Resin Black K Resin-Only RibbonsMetallic Resin Scratch-Off ResinFull-Color Ymcko Dye-Sublimation/Resin RibbonsFull-Color Ymckok Full-Color YmckkLoading Ribbon Into the Printer Take-up Ribbon Drive Hubs Supply Ribbon Sensor Loading Cards Into the Printer About CardsCard Input Tray Card Input Guides Card Hopper Door Self Test Example Actual size Running the Self TestAbout the Laminator Card LaminatingLoading Overlaminate Into the Printer About OverlaminatesSupply Supply Roll Take-up Roll Connecting the Printer to Your Computer Using Your Card PrinterInstalling the Windows Printer Driver Installing Printer Driver Updates Installing the 32-BIT Print Spooler for Windows 95/98 InstallingDownloading Pro-L Card Printer User’s Manual Setting UP the Printer Driver Windows NT Windows 95/98Buffer Single Card AlgebraicCalibrate Card Size Color Matching Dither Mode Disable PrintingImage Placement ControlsLamination Options Panel Only 95% 99%Magnetic Track Options Orientation MonitorOverlay Pause for Low RibbonPrint Back Side Only Picture ControlsPrint Edge-to-Edge Print Both SidesResin Heat Ribbon SensorSplit Ribbon Print SmartShieldUse 32-bit Spooler Write Direct to PortPrinting a Card Maintenance Supplies Required Expanded Printhead Cleaning Standard Printhead CleaningCleaning the PRINTER’S Case Clearing a Card JAM Cleaning the Inside of the PrinterClearing a Ribbon or Overlaminate JAM Cleaning the Card Feed RollersSticky Side Up Cleaning the Drive RollersMaintaining the Cleaning Rollers Pro-L Card Printer User’s Manual Adjusting the Card Input Guides Mechanical AdjustmentsAdjusting the Internal Card Guides Adjusting the Card Separator Flap Card Flap Adjustment Feed Screws Top Card Adjusting the Laminator Pro-L Card Printer User’s Manual Pro-L Card Printer User’s Manual Interpreting LCD Display Messages TroubleshootingTOP Line of LCD Message Cause Solution TOP Line of LCD Message Cause Solution TOP Line of LCD Message Cause Solution TOP Line of LCD Message Cause Solution Only if you are using SmartGuard Security Feature TOP Line of LCD Message Cause Solution If the ribbon seems to be cut Bottom Line of LCD Message Cause Solution Bottom Line of LCD Message Cause Solution Both Lines of LCD Message Cause Solution Both Lines of LCD Message Cause Solution ’m having problems printing from Windows 95/98 General Troubleshooting SuggestionsPrinter beeps just before each ribbon panel is printed Printer doesn’t seem to work at allMy prints have spots small voids in them PolyGuard overlaminate is not centered on my cardPhotos on my ID cards look very pixelated or grainy Printing gets cut off or is not centered on the cardCan’t get the cards in between the Card Input Guides Two or more cards feed at the same timePro-L Card Printer User’s Manual Print Speed Technical SpecificationsCard Capacity Magnetic Track Options Appendix a Magnetic Stripe Encoding ModuleEncoding Mode / Coercivity / Track Selection Character Data Size Encoded Bit DensityCharacter Ascii Offset Character Data Parity LRC Generation ModeSending Track Information ISO Track Locations~20123456789? ~1%JULIE ANDERSON623-85-1253?~30123456789? Introduction Appendix B Interfacing InformationCentronics Type Parallel Interface Table B-1 Parallel Interface Pin Assignments Wire DiagramBar Codes IndexMagnetic Track Options On/cancel button

Pro-L specifications

FARGO Electronic Pro-L is a state-of-the-art card printer designed to meet the rigorous demands of various organizations requiring high-quality plastic card production. Renowned for its reliability and efficiency, the Pro-L series is particularly favored for applications in government, education, healthcare, and corporate environments.

One of the main features of the FARGO Pro-L is its advanced printing technology, which utilizes dye-sublimation and resin thermal transfer methods. This allows users to produce vibrant, high-resolution color images that are both durable and resistant to fading. The printer can deliver edge-to-edge printing, ensuring that every card is visually appealing and professional-looking.

Another notable characteristic of the Pro-L series is its modular design. Users can customize the printer with optional features such as dual-sided printing, which significantly enhances productivity by allowing for the printing of essential information on both sides of the card. Additionally, the printer supports various encoding options like magnetic stripe, smart card, and contactless encoding, making it a versatile solution for diverse applications.

The Pro-L model is equipped with a high-capacity input hopper, which can hold a large number of cards, minimizing the need for frequent refills. Coupled with its impressive printing speed, this feature makes it ideal for high-volume card issuance. The device can print up to 225 full-color cards per hour, streamlining the production process and ensuring timely delivery.

Security is another priority in the design of the FARGO Pro-L. The printer includes features such as user authentication and built-in encryption for data protection. These measures are essential for organizations requiring secure handling of sensitive information, such as IDs, access cards, and payment cards.

Furthermore, the FARGO Pro-L is compatible with various card design software, allowing users to create customized card designs easily. The user-friendly interface simplifies operation, making it accessible for personnel with varying levels of technical expertise.

In conclusion, the FARGO Electronic Pro-L is a comprehensive solution for organizations seeking an efficient, secure, and flexible card printing system. With its advanced features, high-quality output, and customizable options, it stands out as a top choice for professionals looking to enhance their card production capabilities.
Top Page Image Contents