FARGO electronic DTC400, DTC300M Downloading Firmware continued, Select the Desktop dropdown menu

Page 18

• Select the Desktop dropdown menu.

RESTRICTED USE ONLYFargo Electronics, Inc.

Downloading Firmware (continued)

Step	Procedure

14	• Select the Desktop dropdown menu.
	•	Click on the .frm file.
	•	Click on the Open button, as shown below.

15	This completes the Downloading Firmware procedure.

DTC400/DTC300/DTC300M Firmware Upgrade Document (Rev. 1.3)

18

Image 18

Contents Printer/Encoders - Firmware Upgrade Document Rev DTC400/DTC300/DTC300M CardPart Number L000575 Revision Requirements Table of ContentsIntroduction Firmware Upgrade InstructionsSafety Messages review carefully Procedure Downloading FirmwareClick on the Diagnostic Utility, as shown below Click on the Start icon on the desktopDownloading Firmware continued Step ProcedureProcedure Click on the Yes button, as shown belowClick on the Firmware selection box Using the drop down menu select the PrinterThis will launch the Fargo Support page Click on the Go button, as shown belowDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncStep ProcedureDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued Select the Desktop dropdown menu Click on the .frm fileClick on the Open button, as shown below Placing the Printer in the Firmware Upgrade Mode Upgrade Firmware Send File Now Sending the Firmware File Sending the Firmware File continued 4The procedure is now completed