FARGO electronic DTC300 Downloading Firmware continued, This will launch the Fargo Support page

Page 8
This will launch the Fargo Support page

RESTRICTED USE ONLYFargo Electronics, Inc.

Downloading Firmware (continued)

Step

Procedure

 

 

4

This will launch the Fargo Support page

 

• Click on the Firmware selection box.

 

Using the drop down menu select the Printer.

 

Click on the Go button, as shown below.

 

 

 

DTC400/DTC300/DTC300M Firmware Upgrade Document (Rev. 1.3)

8

Image 8
Contents Part Number L000575 Printer/Encoders - Firmware Upgrade Document RevDTC400/DTC300/DTC300M Card Revision Table of Contents IntroductionRequirements Firmware Upgrade InstructionsSafety Messages review carefully Downloading Firmware Click on the Diagnostic Utility, as shown belowProcedure Click on the Start icon on the desktopDownloading Firmware continued Step ProcedureProcedure Click on the Yes button, as shown belowUsing the drop down menu select the Printer This will launch the Fargo Support pageClick on the Firmware selection box Click on the Go button, as shown belowDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncProcedure Downloading Firmware continuedStep RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued RESTRICTED USE ONLYFargo Electronics, IncDownloading Firmware continued Click on the Open button, as shown below Select the Desktop dropdown menuClick on the .frm file Placing the Printer in the Firmware Upgrade Mode Upgrade Firmware Send File Now Sending the Firmware File Sending the Firmware File continued 4The procedure is now completed