Kyocera KR1 manual IP address of the LAN interface. The default IP address is

Page 18

Basic > LAN

LAN is short for Local Area Network, and is considered your internal network. These are the IP settings of the LAN interface for the Kyocera KR1 Mobile Router, and they may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on

the Internet.

Note: There are 254 addresses available on the Kyocera KR1 Mobile Router when using a 255.255.255.0 (Class C) subnet. Example: The router's IP address is 192.168.0.1. The available client IP range is 192.168.0.2 through 192.168.0.254.

IP Address-

The IP address of the LAN interface. The default IP address is: 192.168.0.1

Subnet Mask-

The subnet mask of the LAN interface. The default subnet mask is 255.255.255.0

Local Domain-

This field is optional. Enter in the local domain name.

14

Kyocera KR1 Mobile Router User Guide

Image 18
Contents Kyocera KR1 Mobile Router User Guide Kyocera KR1 Mobile Router User Guide Table of Contents Troubleshooting Introduction Connections-Kyocera KR1 Mobile Router Back ViewLEDs-Kyocera KR1 Mobile Router Front View Features Package Contents Wireless Basics Standards-Based TechnologyInstallation Considerations Installation Instructions Connect the Kyocera KR1 Wireless Router to Your NetworkUsing the Configuration Menu Basic Wizard No Encryption is the default as shown in the screen above Encryption setting for a more secure wireless connection Basic Wireless Security-WPA-PSK Enter the new User Name for your PC card here IP address of the LAN interface. The default IP address is Basic Dhcp Enter the name referencing the virtual service Virtual service This is the name referencing the special application Sites.By default the Filters is IP Filters Enter the name here Enter the name To the Internet. By default the DMZ is Disabled Only a minor modification should be made Kyocera KR1 Mobile Router User Guide Advanced WAN Evdo Administrator tasks from the remote Internet host Recommended Tools System Tools Firmware By default the Ddns is Disabled Tools Misc Tools Cable Test Address Displays the MAC address First page of the log Check the box next to System Log. Click Apply Status Log Log Settings #3 Status Stats Click on Help at any time, for more information Troubleshooting Double-click on Network Adapters Select the Support tab. The IP Address will be displayed Forgot my encryption key. What should I do? What is VPN? What can I do if my Ethernet cable does not work properly? Technical Support Technical SupportTechnical Specifications PptpExt. Power Supply DC 5V, 3.0A Consumer Limited Warranty USA only
Related manuals
Manual 61 pages 12.09 Kb