Kyocera KR1 manual Basic Dhcp

Page 19

Basic > DHCP

DHCP stands for Dynamic Host Control Protocol. The Kyocera KR1 Mobile Router has a built-in DHCP server, which automatically assigns an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to "Obtain an IP Address Automatically." When you turn your computers on, they automatically load the proper TCP/IP settings provided by the Kyocera KR1 Mobile Router. The DHCP Server automatically allocates an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.

DHCP Server-

Select Enabled or Disabled. The default setting is Enabled.

Starting IP Address- The starting IP address for the DHCP server's IP assignment.

Ending IP Address- The ending IP address for the DHCP server's IP assignment.

Lease Time-

The length of time for the IP lease. Enter the Lease time. The default setting is one day.

Using the Configuration Menu

15

Image 19

Contents Kyocera KR1 Mobile Router User Guide Kyocera KR1 Mobile Router User Guide Table of Contents Troubleshooting Connections-Kyocera KR1 Mobile Router Back View IntroductionLEDs-Kyocera KR1 Mobile Router Front View Features Package Contents Standards-Based Technology Wireless BasicsInstallation Considerations Connect the Kyocera KR1 Wireless Router to Your Network Installation InstructionsUsing the Configuration Menu Basic Wizard No Encryption is the default as shown in the screen above Encryption setting for a more secure wireless connection Basic Wireless Security-WPA-PSK Enter the new User Name for your PC card here IP address of the LAN interface. The default IP address is Basic Dhcp Enter the name referencing the virtual service Virtual service This is the name referencing the special application Sites.By default the Filters is IP Filters Enter the name here Enter the name To the Internet. By default the DMZ is Disabled Only a minor modification should be made Kyocera KR1 Mobile Router User Guide Advanced WAN Evdo Administrator tasks from the remote Internet host Recommended Tools System Tools Firmware By default the Ddns is Disabled Tools Misc Tools Cable Test Address Displays the MAC address First page of the log Check the box next to System Log. Click Apply Status Log Log Settings #3 Status Stats Click on Help at any time, for more information Troubleshooting Double-click on Network Adapters Select the Support tab. The IP Address will be displayed Forgot my encryption key. What should I do? What is VPN? What can I do if my Ethernet cable does not work properly? Technical Support Technical SupportPptp Technical SpecificationsExt. Power Supply DC 5V, 3.0A Consumer Limited Warranty USA only

Related manuals

Manual 61 pages 12.09 Kb