Kyocera KR1 manual Enter the name here

Advanced > Filters > MAC Filters

Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router.

Filters-	Select the filter you wish to use; in this case, MAC filters was chosen.
MAC Filters-	Choose Disable MAC filters; allow MAC addresses listed below; or deny MAC addresses listed below.
	By default the MAC Filters is Disabled MAC Filters.
Name-	Enter the name here.
MAC Address- Enter the MAC Address.
DHCP Client-	Select a DHCP client from the pull-down list; click Clone to copy that MAC Address.

20 Kyocera KR1 Mobile Router User Guide