Kyocera KR1 manual Tools Misc

Page 35
The Kyocera KR1 Mobile Router supports VPN (Virtual Private Network) pass-through for both PPTP (Point-to-Point Tunneling Protocol) and IPSec (IP Security). Once VPN pass-through is enabled, there is no need to open up virtual services. Multiple VPN connections can be made through the Kyocera KR1 Mobile Router. This is useful when you have many VPN clients on the LAN network.

Tools > Misc

Ping Test- The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping.

Restart Device- Click Reboot to restart the Kyocera KR1 Mobile Router. This will take a few minutes.

Block WAN Ping- Discard Ping from WAN If you choose to block WAN Ping, the WAN IP address of the Kyocera KR1 Mobile Router does not respond to pings. Blocking the Ping may provide some extra security from hackers. Discard Ping from WAN side. Click Enabled to block the WAN ping. By default the Block WAN Ping is Enabled.

UPNP- To use the Universal Plug and Play feature click on Enabled. UPNP provides compatibility with networking equipment, software and peripherals of the over 400 vendors that cooperate in the Plug and Play forum. By default the UPNP Ping is Enabled.

VPN Pass Through-

PPTP- select Enabled or Disabled. By default the PPTP is Enabled.

IPSec- select Enabled or Disabled. By default the IPSec is Enabled.

Multicast Streams- Enter this option to allow Multicast traffic to pass through the Kyocera KR1 Mobile Router from the Internet.

Using the Configuration Menu

31

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Kyocera KR1 Mobile Router User Guide Kyocera KR1 Mobile Router User Guide Table of Contents Troubleshooting Connections-Kyocera KR1 Mobile Router Back View IntroductionLEDs-Kyocera KR1 Mobile Router Front View Features Package Contents Standards-Based Technology Wireless BasicsInstallation Considerations Connect the Kyocera KR1 Wireless Router to Your Network Installation InstructionsUsing the Configuration Menu Basic Wizard No Encryption is the default as shown in the screen above Encryption setting for a more secure wireless connection Basic Wireless Security-WPA-PSK Enter the new User Name for your PC card here IP address of the LAN interface. The default IP address is Basic Dhcp Enter the name referencing the virtual service Virtual service This is the name referencing the special application Sites.By default the Filters is IP Filters Enter the name here Enter the name To the Internet. By default the DMZ is Disabled Only a minor modification should be made Kyocera KR1 Mobile Router User Guide Advanced WAN Evdo Administrator tasks from the remote Internet host Recommended Tools System Tools Firmware By default the Ddns is Disabled Tools Misc Tools Cable Test Address Displays the MAC address First page of the log Check the box next to System Log. Click Apply Status Log Log Settings #3 Status Stats Click on Help at any time, for more information Troubleshooting Double-click on Network Adapters Select the Support tab. The IP Address will be displayed Forgot my encryption key. What should I do? What is VPN? What can I do if my Ethernet cable does not work properly? Technical Support Technical SupportPptp Technical SpecificationsExt. Power Supply DC 5V, 3.0A Consumer Limited Warranty USA only
Related manuals
Manual 61 pages 12.09 Kb
Top Page Image Contents