Kyocera 3035, 5035, 4035 Open the front cover and pull and push back, On the copy Cleaning shaft

Section 9 TROUBLESHOOTING

Trouble	Checkpoint	Procedure	Reference
			page
Copies come out too dark.	Is the copier in the auto exposure mode?	To change the overall exposure, perform the	7-73
		auto exposure adjustment.
	Is the copier in the manual exposure mode?	Adjust the exposure to the correct degree	4-2
		using the copy exposure adjustment keys.
		To change the overall exposure, perform the	7-75
		exposure adjustment for the each copy	7-76
		quality mode.	7-77
Copies are dirty.	Is the platen or the original cover dirty?	Clean the platen and/or the original cover.	10-1
		Open the front cover and pull and push back	10-5
		in the cleaning shaft.
	Is the transfer roller contaminated?	Clean the transfer roller with the cleaning	10-2
		brush.
Copy image is askew.	Are the originals set correctly?	When setting originals on the platen, align	4-1
		their edges with the correct original size
		scale for their size.
		When setting originals in the optional	8-2
		Document Processor, adjust the original
		insertion guides to the size of the originals
		correctly.
Misfeed occurs frequently.	Is the paper set correctly in the	Set paper properly.	3-1
	drawer[cassette]?
	Is paper curled, folded or wrinkled?	Replace the paper with new paper.	3-1
	Is there any misfed paper or loose scraps of	Carry out the appropriate procedure to	9-4
	paper remaining inside the copier?	remove the paper.
Copies are wrinkled.	Is the separation in the paper feed section	Clean the separator.	10-1
	dirty?
Black or white lines appear	Is the electrostatic section dirty?	Open the front cover and pull and push back	10-5
on the copy.		in the cleaning shaft.

9-14